You are here: Home > CLI Commands > Just_CLI_Topics > ap lldp med-network-policy-profile

ap lldp med-network-policy-profile

ap lldp med-network-policy-profile {default | <profile-name>}

application-type

guest-voice

guest-voice-signaling

softphone-voice

streaming-video

video-conferencing

video-signaling

voice

voice-signaling

clone {default | <source>}

dscp <dscp>

l2-priority <l2-priority>

no ...

tagged

vlan <vlan>

Description

Define an LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. MED network policy profile that defines DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. values and L2 priority levels for a voice or video application.

Syntax

Parameter

Description

Default

ap lldp med-network-policy-profile <profile-name>

Configures an AP LLDP-MEDLLDP–Media Endpoint Discovery. LLDP-MED facilitates information sharing between endpoints and network infrastructure devices. Network Policy Profile

Default

application-type

Specifies the type of application that this profile manages.

guest-voice

Use this application type if the AP services a separate voice network for guest users and visitors.

guest-voice-signaling

Use this application type if the AP is part of a network that requires a different policy for guest voice signaling than for guest voice media. Do not use this application type if both the same network policies apply to both guest voice and guest voice signaling traffic.

 

softphone-voice

Use this application type if the AP supports voice services using soft phone software applications on devices such as PCs or laptops.

streaming-video

Use this application type if the AP supports broadcast or multicast video or other streaming video services that require specific network policy treatment. This application type is not recommended for video applications that rely on TCPTransmission Control Protocol. TCP is a communication protocol that defines the standards for establishing and maintaining network connection for applications to exchange data. with buffering.

video-conferencing

Use this application type of the AP supports video conferencing equipment that provides real-time, interactive video and audio services.

video-signaling

Use this application type if the AP is part of a network that requires a different policy for video signaling than for the video media. Do not use this application type if both the same network policies apply to both video and video signaling traffic.

voice

Use this application type if the AP services IP telephones and other appliances that support interactive voice services.

NOTE: This is the default application type.

voice-signaling

Use this application type if the AP is part of a network that requires a different policy for voice signaling than for the voice media. Do not use this application type if both the same network policies apply to both voice and voice signaling traffic.

clone {default | <source>}

Makes a copy of an existing profile by specifying that profile name.

dscp <dscp>

Selects a DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. priority value for the specified application type by specifying a value from 0-63, where 0 is the lowest priority level and 63 is the highest priority.

0–63

Default is 0

l2-priority <L2-priority>

 

Select a 802.1p priority level for the specified application type, by specifying a value from 0–7, where 0 is the lowest priority level and 7 is the highest priority.

0–7

Default is 0

no

Negates any setting or return a configured parameter it to its default value.

tagged

Specifies if the policy applies to a to a VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. that is tagged with a VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. ID or untagged. The default value is untagged.

NOTE: When an LLDP-MEDLLDP–Media Endpoint Discovery. LLDP-MED facilitates information sharing between endpoints and network infrastructure devices. network policy is defined for use with an untagged VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN., then the L2 priority field is ignored and only the DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. value is used.

Default is untagged

vlan <vlan>

Specifies a VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. by VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. ID (0–4094) or VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. name.

Default is 0

Usage Guidelines

LLDP-MEDLLDP–Media Endpoint Discovery. LLDP-MED facilitates information sharing between endpoints and network infrastructure devices. (media endpoint devices) is an extension to LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. that supports interoperability between VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. devices and other networking clients. LLDP-MEDLLDP–Media Endpoint Discovery. LLDP-MED facilitates information sharing between endpoints and network infrastructure devices. network policy discovery lets endpoints and network devices advertise their VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. IDs (for example, voice VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN.), priority levels, and DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. values. ArubaOS supports a maximum of eight LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. -MED Network Policy profiles.

Creating an LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. MED network policy profile does not apply the configuration to any AP or AP interface or interface group. To apply the LLDP-MEDLLDP–Media Endpoint Discovery. LLDP-MED facilitates information sharing between endpoints and network infrastructure devices. network policy profile, you must associate it to an LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. profile, then apply that LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. profile to an AP wired port profile.

Example

The following commands create a LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. MED network policy profile for streaming video applications and marks streaming video as high-priority traffic.

(host) [mynode] (config) #ap lldp med-network-policy-profile vid-stream

(host) [mynode] (AP LLDP-MED Network Policy Profile "vid-stream") #dscp 48

(host) [mynode] (AP LLDP-MED Network Policy Profile "vid-stream") #l2-priority 6

(host) [mynode] (AP LLDP-MED Network Policy Profile "vid-stream") #tagged

(host) [mynode] (AP LLDP-MED Network Policy Profile "vid-stream") #vlan 10

Next, the LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. MED network policy profile is assigned to an LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. profile, and the LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. profile is associated with an AP wired-port profile.

(host) [mynode] (config) #ap lldp profile video1

(host) [mynode] (AP LLDP Profile "video1") #ap lldp-med-network-policy-profile vid-stream

(host) [mynode] (AP LLDP Profile "video1") #

(host) [mynode] (config) #ap wired-port-profile corp2

(host) [mynode] (AP wired port profile "corp2") #lldp-profile video1

Command History:

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/