You are here: Home > CLI Commands > Just_CLI_Topics > ap-move

apmove

apmove

all

ap-group <ap-group>

ap-mac <ap-mac>

Description

When HA is enabled, use this command to move an AP or group of APs to their managed devices.

Syntax

Parameter

Description

all

Move all APs.

ap-group <ap-group>

Move all APs belonging to the specified AP group.

ap-mac <ap-mac>

Move all APs belonging to the MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. of the specified AP.

target-v4

Target managed device IPv4 address.

target-v6

Target managed device IPv6 address.

Usage Guidelines

When HA is enabled on a pair of managed devices, this command should be used when it is necessary to move a single AP, all APs in an ap-group, or all APs to switchover to their standby managed device without an actual failure of the active managed device. For example, this allows the network admin to manually move one or more APs to their managed device and perform a planned upgrade or maintenance on the active managed device.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

Available on all platforms.

Base operating system.

Config mode on Mobility Master.

/*]]>*/