You are here: Home > CLI Commands > Just_CLI_Topics > ap redeploy controller-less

ap redeploy controller-less

ap redeploy controller-less

all

ap-group <ap-group>

ap-name <ap-name>

ip-addr <ip-addr>

ip6-addr <ip6-addr>

wired-mac <wired-mac>

Description

This command sets the AP preference role to controller-less, allowing the AP to bypass controller discovery and immediately initiate Instant discovery during AP image upgrade. APs with the controller-less preference role are deployed as controller-less APs.

 

The ap redeploy controller-less command works only for UAPs and is applicable to AP-203H, AP-203R, AP-203RP, AP-303, AP-303H, 303P Series, AP-318, AP-344, AP-345, AP-365, AP-367, AP-374, AP-375, AP-377, AP-387, AP-534, and AP-535 access points only.

Syntax

Parameter

Description

all

Deploys all APs as controller-less APs.

ap-group <ap-group>

Deploys all APs in the specified AP group as controller-less APs.

ap-name <ap-name>

Deploys a specific AP as a controller-less AP.

ip-addr <ip-addr>

Deploys the AP with a specific IP address as a controller-less AP.

ip6-addr <ip6-addr>

Deploys the AP with a specific IPv6 address as a controller-less AP.

wired-mac <wired-mac>

Deploys the AP with a specific MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address as a controller-less AP.

Example

The following command deploys all APs as controller-less APs:

(host) [mynode] #ap redeploy controller-less all

Command History

Release

Modification

ArubaOS 8.2.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable mode on master Mobility Master.

/*]]>*/