You are here: Home > CLI Commands > Just_CLI_Topics > ap-regroup

ap-regroup

ap-regroup {ap-name <name>|serial-num <num>|wired-mac <macaddr>} <group>

Description

This command moves a specified AP into a group.

Syntax

Parameter

Description

Default

ap-name

Name of the AP.

serial-num

Serial number of the AP.

wired-mac

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the AP.

<group>

Name that identifies the AP group. The name must be 1-63 characters.

“default”

Usage Guidelines

All APs discovered by the Mobility Master are assigned to the “default” AP group. An AP can belong to only one AP group at a time. You can move an AP to an AP group that you created with the ap-group command.

 

This command automatically reboots the AP.

Example

The following command moves an AP to the ‘corpnet’ group:

(host) [mynode] (config) #ap-regroup wired-mac 00:0f:1e:11:00:00 corpnet

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable and Config mode on Mobility Master.

/*]]>*/