You are here: Home > CLI Commands > Just_CLI_Topics > ap test

ap test

ap test

ap-name dot11k-force-beacon-request dot11k-force-link-measurement-request

dot11k-force-tsm-request dot11v-force-bss-transition force_send_delts ip-addr ip6-addr rebootstrap wan

Description

Execute this command to get the test results in an AP.

Syntax

Parameter

Description

Range

Default

ap test

Run test command on AP.

ap-name|bar-retries|bar-times

Name of the access point.

dot11k-force-beacon-request|sta|<sta_mac>

Test force sending 802.11802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing. Beacon Report Request frame.

dot11k-force-link-measurement-request|sta|<sta_mac>

Test force sending 802.11802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing. Link Measurement Request frame.

dot11k-force-tsm-request|sta|<sta_mac>

Test force sending TSM Report Request frame.

dot11v-force-bss-transition|sta|<sta_mac>

Test force sending BSSBasic Service Set. A BSS is a set of interconnected stations that can communicate with each other. BSS can be an independent BSS or infrastructure BSS. An independent BSS is an ad hoc network that does not include APs, whereas the infrastructure BSS consists of an AP and all its associated clients. Transition Mgmt Request frame.

force_send_delts

Force sending DELTS to the client.

ip-addr

IP Address of Access Point.

ip6-addr

IPv6 address of Access Point.

rebootstrap|ap-name|ip-addr|ip6-addr

Rebootstrap AP.

wan|down|up

Wan link test command.

down — Trigger wan down event.

up — Trigger wan up event.

Example

The following command displays different results of AP-related tests:

(host) [mynode] #ap test

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/