You are here: Home > CLI Commands > Just_CLI_Topics > ap wired-port-profile

ap wired-port-profile

ap wired-port-profile {default | <profile-name>}

aaa-profile {default | <profile-name>}

authentication-timeout <timeout>

auto-recovery-enable

auto-recovery-interval <auto-recovery-interval>

bridge-role

clone {default | <source>}

enet-link-profile <profile-name>

lldp-profile {default | <profile-name>}

loop-detection-interval <loop-detection-interval>

loop-protect-enable

no

portfast

portfast-trunk

rap-backup

shutdown

spanning-tree

storm-control-broadcast

storm-control-broadcast-threshold

wired-ap-profile <profile-name>

Description

This command configures a wired port profile.

Syntax

Parameter

Description

Range

Default

ap wired-port-profile

<profile-name>

Name of this instance of the profile. The name must be 1–63 characters.

 

default

aaa-profile <profile-name>

Name of a AAAAuthentication, Authorization, and Accounting. AAA is a security framework to authenticate users, authorize the type of access based on user credentials, and record authentication events and information about the network access and network resource consumption. profile to be used by devices connecting to the wired port of the AP.

 

 

authentication-timeout

<timeout>

Authentication timeout value, in seconds, for devices connecting the wired port of the AP. The supported range is 1–65535 seconds, and the default value is 20 seconds.

1–65535 seconds

5 seconds

auto-recovery-enable

Enables automatic recovery of the port in the AP that is shut down because of loop protection. After the automatic recovery, if the loop re-occurs, then the port is shutdown again

 

Disabled

auto-recovery-interval <auto-recovery-interval>

Specify the time, in seconds, to automatically recover the port in the AP that is shut down because of loop protection.

30-43200 seconds

300 seconds

bridge-role <role>

Role that is assigned to a user if split-tunnel authentication fails.

 

 

clone <source>

Create a new AP wired port profile based upon the values of an existing profile.

 

default

enet-link-profile

<profile-name>

Specify an EthernetEthernet is a network protocol for data transmission over LAN. link profile to be used by devices associated with this wired port profile. The EthernetEthernet is a network protocol for data transmission over LAN. link profile defines the duplex value and speed to be used by the port.

 

 

lldp-profile <profile-name>

Specify an LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. profile to be used by devices associated with this wired port profile. The LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. profile specifies the type-length-value (TLVType-length-value or Tag-Length-Value. TLV is an encoding format. It refers to the type of data being processed, the length of the value, and the value for the type of data being processed.) elements to be sent in LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. PDUs.

 

 

loop-detection-interval <loop-detection-interval>

Specify the time, in seconds, to send loop detection packets on the ports of an AP.

1-10 seconds

2 seconds

loop-protect-enable

Enables loop protection on the ports of an AP.

 

Disabled

no

Negates any defined parameter

 

 

portfast

Enables portfast for AP wired ports.

Spanning tree must be enabled before this command can be used.

 

 

portfast-trunk

Spanning tree must be enabled before this command can be used.

 

 

rap-backup

Use the rap-backup parameter to use the wired port on a Remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. for local connectivity and troubleshooting when the AP cannot reach the managed device. If the AP is not connected to the managed device, no firewallFirewall is a network security system used for preventing unauthorized access to or from a private network. policies will be applied when this option is enabled. (The AAAAuthentication, Authorization, and Accounting. AAA is a security framework to authenticate users, authorize the type of access based on user credentials, and record authentication events and information about the network access and network resource consumption. profile will be applied when the AP is connected to managed device).

 

 

shutdown

Disable the wired AP port.

 

 

spanning-tree

Enables the spanning-tree protocol.

 

 

storm-control-broadcast

Enables the broadcast storm control. When this parameter is enabled, if the AP detects a loop on one of its EthernetEthernet is a network protocol for data transmission over LAN. port, it shuts down the EthernetEthernet is a network protocol for data transmission over LAN. port. This prevents the AP from receiving or sending any frames.

   

storm-control-broadcast-threshold

Specify the broadcast packets per second on each EthernetEthernet is a network protocol for data transmission over LAN. port of an AP before the EthernetEthernet is a network protocol for data transmission over LAN. port is shut down.

 

2000

wired-ap-profile <profile-name>

Name of a wired AP profile to be used by devices connecting the wired port of the AP. The wired AP profile defines the forwarding mode and switchport values used by the port.

 

 

Usage Guidelines

This command is only applicable to APs with EthernetEthernet is a network protocol for data transmission over LAN. ports. Issue this command to enable or disable the wired port, define an AAAAuthentication, Authorization, and Accounting. AAA is a security framework to authenticate users, authorize the type of access based on user credentials, and record authentication events and information about the network access and network resource consumption. profile for wired port devices, and associate the port with an ethernet link profile that defines its speed and duplex values.

Example

The following command defines a AAAAuthentication, Authorization, and Accounting. AAA is a security framework to authenticate users, authorize the type of access based on user credentials, and record authentication events and information about the network access and network resource consumption. profile for wired port devices:

(host)[mynode] (config) #ap wired-port-profile wiredport1

(host)[mynode] (AP wired port profile"wiredport1") #aaa-profile default-open

(host)[mynode] (AP wired port profile"wiredport1") #authentication-timeout 30

(host)[mynode] (AP wired port profile"wiredport1") #wired-ap-profile wiredap1

Command History

Release

Modification

ArubaOS 8.3.0.0

The following parameters were introduced:

auto-recovery-enable

auto-recovery-interval

loop-detection-interval

loop-protect-enable

storm-control-broadcast

storm-control-broadcast-threshold

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system, except for noted parameters.

Config mode on Mobility Master.

/*]]>*/