You are here: Home > CLI Commands > Just_CLI_Topics > boot

boot

boot

cf-test [fast|read-only|read-write]

system partition <partition_id>

verbose

Description

Configure the boot options for the controller.

Syntax

Parameter

Description

cf-test

Sets the type of compact flash test to run when booting the controller.

fast

Performs a fast test, which does not include media testing.

read-only

Performs a read-only media test.

read-write

Performs a read-write media test.

system partition {0 | 1}

Enter system partition followed by the partition number (0 or 1) that you want the controller to use during the next boot (login) of the controller.

NOTE: A controller reload is required before the new boot partition takes effect.

verbose

Prints extra debugging information at boot.

Usage Guidelines

Use the following options to control the boot behavior of the controller:

cf-test—Test the flash during boot.

system partition—Specify the system partition to use during the controller’s next boot (login).

verbose—Print extra debugging information during boot. The information is sent to the screen at boot time. Printing the extra debugging information is disabled using the no boot verbose command.

Example

The following command uses system partition 1 the next time the controller boots:

(host) [mynode] #boot system partition 1

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config and Enable mode on Mobility Master.

/*]]>*/