You are here: Home > CLI Commands > Just_CLI_Topics > clear

clear

clear

aaa acl airgroup amon-receiver amon-sender ap arp counters crypto datapath dot1x fault gap-db gsm ifmap ip ipc ipv6 lc-cluster lldp loginsession

master-local master-local-entry master-local-session

mon-serv

mon-serv-fwv openflow openflow-controller pan

perf-test phonehome port port-security-error provisioning-ap-list provisioning-params rap-wml ucc update-counter vpdn web-cc websocket whitelist-db wms

Description

This command clears various user-configured values from your running configuration.

Syntax

Parameter

Description

aaa

Clear all values associated with authentication profile.

auth-survivability-cache

Clear all auth survivability cached data.

Parameters:

all—Clear all entries in the auth survivability cache.

station—Clear an entry in the auth survivability cache for station.

authentication-server

Provide authentication server details to clear values specific to an authentication server or all authentication server.

Parameters:

all—Clear all server statistics.

internal—Clear Internal server statistics.

ldap—Clear LDAPLightweight Directory Access Protocol. LDAP is a communication protocol that provides the ability to access and maintain distributed directory information services over a network. server statistics.

radius—Clear RADIUSRemote Authentication Dial-In User Service. An Industry-standard network access protocol for remote authentication. It allows authentication, authorization, and accounting of remote users who want to access network resources.  server statistics.

tacacs—Clear TACACSTerminal Access Controller Access Control System. TACACS is a family of protocols that handles remote authentication and related services for network access control through a centralized server. server statistics.

device-id-cache

Clear all device ID cache.

Parameters:

all—Clear all entries in the device ID cache.

mac—Clear entries in the device ID cache for MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network.  address.

load-balance|statistics

Clear load balance statistics.

Parameters:

server group—Clear load balance statistics of a server group.

multiple-server-accounting|statistics

Clear multiple server accounting statistics.

Parameters:

all—Clear for all server groups.

server-group—Clear multiple server accounting statistics for a server group.

state

Clear internal status of authentication modules.

Parameters:

configuration—Clear all configured objects.

debug-statistics—Clear debug statistics.

messages—Clear authentication messages that were sent and received.

acl

Clear ACLAccess Control List. ACL is a common way of restricting certain types of traffic on a physical port. statistics.

hits

Clear ACLAccess Control List. ACL is a common way of restricting certain types of traffic on a physical port. hit statistics.

airgroup

Clear AirGroupThe application that allows the end users to register their personal mobile devices on a local network and define a group of friends or associates who are allowed to share them. AirGroup is primarily designed for colleges and other institutions. AirGroup uses zero configuration networking to allow Apple mobile devices, such as the AirPrint wireless printer service and the AirPlay mirroring service, to communicate over a complex access network topology. statistics and user entries from the user table.

cli-policy all

Clears AirGroupThe application that allows the end users to register their personal mobile devices on a local network and define a group of friends or associates who are allowed to share them. AirGroup is primarily designed for colleges and other institutions. AirGroup uses zero configuration networking to allow Apple mobile devices, such as the AirPrint wireless printer service and the AirPlay mirroring service, to communicate over a complex access network topology. policies except ClearPass Policy ManagerClearPass Policy Manager is a baseline platform for policy management, AAA, profiling, network access control, and reporting. With ClearPass Policy Manager, the network administrators can configure and manage secure network access that accommodates requirements across multiple locations and multivendor networks, regardless of device ownership and connection method. policies.

server

Clears AirGroupThe application that allows the end users to register their personal mobile devices on a local network and define a group of friends or associates who are allowed to share them. AirGroup is primarily designed for colleges and other institutions. AirGroup uses zero configuration networking to allow Apple mobile devices, such as the AirPrint wireless printer service and the AirPlay mirroring service, to communicate over a complex access network topology. servers.

statistics

blocked-queries—Clears the statistics of service IDs which were queried but not available in the AirGroupThe application that allows the end users to register their personal mobile devices on a local network and define a group of friends or associates who are allowed to share them. AirGroup is primarily designed for colleges and other institutions. AirGroup uses zero configuration networking to allow Apple mobile devices, such as the AirPrint wireless printer service and the AirPlay mirroring service, to communicate over a complex access network topology. service table.

blocked-service-id—Clears the statistics for the list of blocked services.

cppm-entries—Clears the statistics that are displayed for show airgroup cppm entries command.

internal-state—Clears internal state statistics of mDNSMulticast Domain Name System. mDNS provides the ability to perform DNS-like operations on the local link in the absence of any conventional unicast DNS server. The mDNS protocol uses IP multicast User Datagram Protocol (UDP) packets, and is implemented by the Apple Bonjour and Linux NSS-mDNS services. mDNS works in conjunction with DNS Service Discovery (DNS-SD), a companion zero-configuration technique specified. See RFC 6763. module.

multi-controller—Clears the statistics maintained for multi-controller message exchanges.

query—Clears statistics maintained in the user and server table.

service—Clears statistics maintained in the AirGroupThe application that allows the end users to register their personal mobile devices on a local network and define a group of friends or associates who are allowed to share them. AirGroup is primarily designed for colleges and other institutions. AirGroup uses zero configuration networking to allow Apple mobile devices, such as the AirPrint wireless printer service and the AirPlay mirroring service, to communicate over a complex access network topology. service table.

user

Mac Address—Clears the AirGroupThe application that allows the end users to register their personal mobile devices on a local network and define a group of friends or associates who are allowed to share them. AirGroup is primarily designed for colleges and other institutions. AirGroup uses zero configuration networking to allow Apple mobile devices, such as the AirPrint wireless printer service and the AirPlay mirroring service, to communicate over a complex access network topology. server Mac addresses.

dlna—Clears the AirGroupThe application that allows the end users to register their personal mobile devices on a local network and define a group of friends or associates who are allowed to share them. AirGroup is primarily designed for colleges and other institutions. AirGroup uses zero configuration networking to allow Apple mobile devices, such as the AirPrint wireless printer service and the AirPlay mirroring service, to communicate over a complex access network topology. DLNADigital Living Network Alliance. DLNA is a set of interoperability guidelines for sharing digital media among multimedia devices. users.

mdns—Clears the AirGroupThe application that allows the end users to register their personal mobile devices on a local network and define a group of friends or associates who are allowed to share them. AirGroup is primarily designed for colleges and other institutions. AirGroup uses zero configuration networking to allow Apple mobile devices, such as the AirPrint wireless printer service and the AirPlay mirroring service, to communicate over a complex access network topology. mDNSMulticast Domain Name System. mDNS provides the ability to perform DNS-like operations on the local link in the absence of any conventional unicast DNS server. The mDNS protocol uses IP multicast User Datagram Protocol (UDP) packets, and is implemented by the Apple Bonjour and Linux NSS-mDNS services. mDNS works in conjunction with DNS Service Discovery (DNS-SD), a companion zero-configuration technique specified. See RFC 6763. users.

all—Removes the current AirGroupThe application that allows the end users to register their personal mobile devices on a local network and define a group of friends or associates who are allowed to share them. AirGroup is primarily designed for colleges and other institutions. AirGroup uses zero configuration networking to allow Apple mobile devices, such as the AirPrint wireless printer service and the AirPlay mirroring service, to communicate over a complex access network topology. user entries from the user table.

ap

Clear all AP related information.

arm bandwidth-management

Clears AP bandwidth management table counters. An AP can be specified by ap-name, BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly., IPv4 address, or IPv6 address.

arm client-match

rules file-name <file-name> —Clears an imported file of ClientMatch rules.

summary—Clears the ClientMatch summary information

unsupported—Clears the MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of an unsteerable client or clients.

crash-info

Clears AP crash information. An AP can be specified by ap-name, IPv4 address, or IPv6 address.

debug

bss-dmo-stats— Clears DMODynamic Multicast Optimization. DMO is a process of converting multicast streams into unicast streams over a wireless link to enhance the quality and reliability of streaming videos, while preserving the bandwidth available to non-video clients. debug statistics from a specific BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. of an AP.

classification-counters—Clears classification counters.

client-stats— Clears statistics from a client.

dot11r {efficiency-stat}— Clears 802.11r802.11r is an IEEE standard for enabling seamless BSS transitions in a WLAN. 802.11r standard is also referred to as Fast BSS transition. -related stats.

lacp—Clears transmitted and received packet counters displayed in the show ap debug lacp command.

lldp—Clears LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. for an AP.

counters—Clears LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. statistics.

openflow— Clears openflow statistics.

radio-stats— Clears aggregate radio debug statistics of an AP.

sta-msg-stats—Clear AP-STMStation Management. STM is a process that handles AP management and user association. to STMStation Management. STM is a process that handles AP management and user association. message statistics.

mesh

Clear all mesh commands.

debug—Clears debug information.

counters—Clears statistics for a mesh node.

port {ap-name | serial-num | wired-mac} <port>

Toggle the link on the specified port.

ap-nameClear specified port on AP with this name.

serial-numClear specified port on AP with this serial number.

wired-mac—Clear specified port on AP at this MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address.

remote flash-config

Clears the flash configuration from a specified AP. An AP can be specified by ap-name, BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly., IPv4 address, or IPv6 address.

arm

Clear the following types of ARMAdaptive Radio Management. ARM dynamically monitors and adjusts the network to ensure that all users are allowed ready access. It enables full utilization of the available spectrum to support maximum number of users by intelligently choosing the best RF channel and transmit power for APs in their current RF environment. ClientMatch information:

client-match-summary

client-match-unsteerable

arp

Clear all ARPAddress Resolution Protocol. ARP is used for mapping IP network address to the hardware MAC address of a device. table information. You can either clear all information or enter the IP address of the ARPAddress Resolution Protocol. ARP is used for mapping IP network address to the hardware MAC address of a device. entry to clear a specific value.

counters

Clear all interface configuration values.

gigabitethernet

Clears configuration related to gigabitethernet ports.

port-channel <id>

Clears statistics related to a port-channel. Port-channel ID ranges from 0 to 7.

tunnel

Clears all tunnel configuration values on interface ports.

vrrp [ipv6]

Clears all VRRPVirtual Router Redundancy Protocol. VRRP is an election protocol that dynamically assigns responsibility for a virtual router to one of the VRRP routers on a LAN. configuration values on interface ports. Include the ipv6 parameter to clear IPv6 counters.

crypto

Clears the specified crypto information.

dp

Clears crypto latest DP packets.

ipsec sa [peer [[<ip-address>] [v6 <ipv6-address>]]]

Clears crypto IPsecInternet Protocol security. IPsec is a protocol suite for secure IP communications that authenticates and encrypts each IP packet in a communication session. state SAs for the following:

peer—state for a peer

v6—state for an ipv6 peer

isakmp sa [peer [[<source-ip>] [v6 <source-ipv6>]]]

Clears crypto isakmp state SAs for the following:

peer—state for a peer

v6—state for an ipv6 peer

stats

Clears crypto statistics.

datapath

Clears all configuration values and statistics for the following datapath modules.

application {counters}

bridge {counters}

bwm {counters}

compression {counters}

cp-bwm {counters}

crypto {counters}

debug {performance}

dma {counters}

eap {counters}

frame {counters}

hardware {counters|statistics}

ip-fragment-table {ipv4|ipv6}

ip-reassembly {counters}

maintenance {counters}

message-queue {counters}

mobility {stats}

network {egress|ingress}

papi {counters|remote-device-table}

route {counters}

route-cache {A.B.C.D|counters}

scheduler {counters}

session {dpi|counters}

ssl {counters}

station {counters}

tcp {counters}

tunnel {counters}

user {counters}

wan-hc {counters}

web-cc {counters}

wifi-reassembly {counters}

wmm {counters}

dot1x

Clears all 802.1X802.1X is an IEEE standard for port-based network access control designed to enhance 802.11 WLAN security. 802.1X provides an authentication framework that allows a user to be authenticated by a central authority.-specific counters and supplicant statistics. Use the following parameters:

counters

supplicant-info

fault

Clears all SNMPSimple Network Management Protocol. SNMP is a TCP/IP standard protocol for managing devices on IP networks. Devices that typically support SNMP include routers, switches, servers, workstations, printers, modem racks, and more. It is used mostly in network management systems to monitor network-attached devices for conditions that warrant administrative attention.  fault configuration.

gap-db

Clears global AP database. This command is often used to clear all stale AP records. Use the following parameters:

ap-name

lms

wired-mac

To delete stale APs:

1. Issue the clear gap-db stale-ap ap-name <ap-name> lms lms-ip <lms-ip> command to delete a stale entry on a particular managed device.

2. Issue the clear gap-db ap-name <ap-name> command to delete the GAP entries for the AP on the Mobility Master and the current LMSLocal Management Switch. In multi-controller networks, each controller acts as an LMS and terminates user traffic from the APs, processes, and forwards the traffic to the wired network. of the AP.

NOTE: The first step will delete stale entries individually from the old managed devices and the second step will remove stale entries for the Mobility Master and the current LMSLocal Management Switch. In multi-controller networks, each controller acts as an LMS and terminates user traffic from the APs, processes, and forwards the traffic to the wired network. .

gsm

Clear GSM statistics.

ifmap

Clear IF-MAP connection.

ip

Clears all IP information from DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  bindings, IGMPInternet Group Management Protocol. Communications protocol used by hosts and adjacent routers on IP networks to establish multicast group memberships. groups and IP mobility configuration. Use the following parameters:

dhcp

igmp {cluster|group|mobility-group|stats-counters}

mobile {host|multicast-vlan-table|traffic|trail}

probe {stats}

ipc|statistics

Clears all inter process communication statistics. Use the following parameters:

app-ap

app-id

app-name

app-ap

Clears the statistics related to the following AP commands:

am

ofald

sapd

stm

app-id

Clears the statistics related to an application id.

app-name

Clears statistics application name related statistics:

aaa

ads

auth-resp

authmgr

certmgr

cfgm

cluster_mgr

cpsec

cts

dbsync

dds

dhcp

esi

extifmgr

fpapps

gsmmgr

httpd

ike

ip_flow_export

l2tp L2TP

licensemgr

mdns

mobileip

ntp

ofa

ospf

phonehome

pim

pktfilter

pptp

profmgr

publisher

resolver

sapm

sapm-resp

snmpt

stm

stm-lopri

syslogd

ucm

userdb

web_cc

wms

ipv6

Clears all IPv6 session statistics, MLDMulticast Listener Discovery. A component of the IPv6 suite. It is used by IPv6 routers for discovering multicast listeners on a directly attached link. group and member information, MLDMulticast Listener Discovery. A component of the IPv6 suite. It is used by IPv6 routers for discovering multicast listeners on a directly attached link. statistics, counters, and DHCPv6 binding information. Use the following parameters:

datapath {session}

counters

dhcp {binding}

mld {cluster <stats>|group|proxy-mobility-group|information|stats-counters}

neighbor {all|ipv6}

lc-cluster

Clear cluster status.

gsm counters

Clear GSM counter information for that cluster.

papi counters

Clear PAPIProcess Application Programming Interface. PAPI controls channels for ARM and Wireless Intrusion Detection System (WIDS) communication to the master controller. A separate PAPI control channel connects to the local controller where the SSID tunnels terminate. counter information for that cluster.

vlan-probe counters

Clear vlanVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN.-probe counters for that cluster.

lldp

Clears LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. information on all the interfaces. Use the following parameters:

neighbors {interface gigabitethernet |fastethernet slot/module/port}

statistics {interface gigabitethernet |fastethernet slot/module/port}

loginsession

Clears loginsession information for a specific login session, as identified by the session id.

master-local

Clears all master-local switch statistics.

stats

Clears the statistics of local or all switches connected to the Mobility Master or managed devices. Use the following sub-parameters:

all— Clears the statistics of all the managed devices.

ip {ipv4-address | ipv6-address}— Clears the statistics of IPv4 address or IPv6 address of the switch.

local-stats— Clears the master-local statistics at the managed device.

master-local-entry

Clears managed device information from the Mobility Master LMSLocal Management Switch. In multi-controller networks, each controller acts as an LMS and terminates user traffic from the APs, processes, and forwards the traffic to the wired network. list. Specify the IP address of the managed device to be removed from the Mobility Master active LMSLocal Management Switch. In multi-controller networks, each controller acts as an LMS and terminates user traffic from the APs, processes, and forwards the traffic to the wired network. list.

master-local-session

Clear and reset master local TCPTransmission Control Protocol. TCP is a communication protocol that defines the standards for establishing and maintaining network connection for applications to exchange data. connection. Specify the IP address of either the Mobility Master or managed device.

mon-serv

Clears all monitoring server statistics. Use the following parameters:

ap-microboot-stats — Clears the AP micro-bootstrapping statistics.

message-stats — Clears the monitoring and Advanced Monitoring (AMONAdvanced Monitoring. AMON is used in Aruba WLAN deployments for improved network management, monitoring and diagnostic capabilities.) message statistics.

microboot-stats-all — Clears all micro-bootstrapping statistics.

radio-microboot-stats — Clears Radio micro-bootstrapping statistics.

sta-microboot-stats — Clears STA micro-bootstrapping statistics.

vap-microboot-stats — Clears VAP micro-bootstrapping statistics.

mon-serv-fwv

Clears all monitoring server statistics. Use the following parameters:

apprf-pool-counters — Clears AppRF Pool counters.

message-stats — Clears the monitoring and Advanced Monitoring (AMONAdvanced Monitoring. AMON is used in Aruba WLAN deployments for improved network management, monitoring and diagnostic capabilities.) message statistics.

openflow

Clear openflow statistics.

openflow-controller

Clear openflow statistics of the controller.

pan

Clear Palo Alto Networks interface.

perf-test

Clear Iperf throughput test process.

reports

Displays lperf throughput test reports. Use the following parameters:

ap {ap-name | ip-addr| ip6-addr}— All lperf throughput test on the access point.

controller — All lperf throughput test on the controller.

phonehome

Resets phonehome stats.

port

Clear all port statistics that includes link-event counters or all counters. Use the following parameters:

link-event

stats

port-security-error

gigabitethernet

Clear all port-security-error counters. Use the following parameters:

slot

module

port

provisioning-params

Clear provisioning parameters and reset them to the default configuration values.

rap-wml

Clear wired MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. lookup cache for a DB server.

ucc

Clear UCCUnified Communications and Collaboration. UCC is a term used to describe the integration of various communications methods with collaboration tools such as virtual whiteboards, real-time audio and video conferencing, and enhanced call control capabilities. state information.

client ip <ipaddr>

Clear the UCCUnified Communications and Collaboration. UCC is a term used to describe the integration of various communications methods with collaboration tools such as virtual whiteboards, real-time audio and video conferencing, and enhanced call control capabilities. counter for a client.

sessions ip <ipaddr>

Clear active UCCUnified Communications and Collaboration. UCC is a term used to describe the integration of various communications methods with collaboration tools such as virtual whiteboards, real-time audio and video conferencing, and enhanced call control capabilities. sessions based on a specific client IP address.

statistics counter call {client|global}

Clear UCCUnified Communications and Collaboration. UCC is a term used to describe the integration of various communications methods with collaboration tools such as virtual whiteboards, real-time audio and video conferencing, and enhanced call control capabilities. call statistics based on particular client or system wide.

update-counter

Clear all update counter statistics.

vpdn

Clear all VPDN configuration for L2TPLayer-2 Tunneling Protocol. L2TP is a networking protocol used by the ISPs to enable VPN operations. and PPTPPoint-to-Point Tunneling Protocol. PPTP is a method for implementing virtual private networks. It uses a control channel over TCP and a GRE tunnel operating to encapsulate PPP packets. tunnel. Use the following parameters:

tunnel l2tp id <l2tp-tunnel-id>

tunnel pptp id <pptp-tunnel-id>

web-cc

Clear all web content classification information.

web-cc cache <MD5-1>

Clear web content category URLsUniform Resource Locator. URL is a global address used for locating web resources on the Internet. from the datapath cache by specifying the two MD5Message Digest 5. The MD5 algorithm is a widely used hash function producing a 128-bit hash value from the data input. values of the URLUniform Resource Locator. URL is a global address used for locating web resources on the Internet. to be removed from the cache. To view all entries in the datapath, and the MD5Message Digest 5. The MD5 algorithm is a widely used hash function producing a 128-bit hash value from the data input. values for each entry, issue the command show datapath web-cc.

web-cc stats

Clear all web content classification statistics. To view current statistics information, issue the command show web-cc stats.

web-cc md

Clear all web content classification managed nodes. Use the following parameter:

stats — Clears all web content classification statistics.

websocket

Clear Web-Socket Interface statistics.

whitelist-db

Clear whitelist statistics.

Use the following parameter:

cpsec—stats — Clear CPsecControl Plane Security. CPsec is a secure form of communication between a controller and APs to protect the control plane communications. This is performed by means of using public-key self-signed certificates created by each master controller. whitelist statistics.

wms

Clear all WLANWireless Local Area Network. WLAN is a 802.11 standards-based LAN that the users access through a wireless connection. management commands. Use the following parameters:

ap — All AP related commands. Specify the BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. of the AP.

client — Clear all wired client related commands. Specify the MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the client.

event — Clears all events. Parameters:

database-id — Clear a single event with database id.

event-type — Clear all events with type.

target-mac — Clear all events assigned to a target MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. .

probe — Clear all probe information. Specify the BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. of the probe.

ap

Clear AP information.

client

Clear client information.

event

Clear event information.

probe

Clear probe information.

wired-mac

Clear learned and collected wired-mac information:

all — Clear all learned and collected wired mac information.

gw-mac — Clear gatewayGateway is a network node that allows traffic to flow in and out of the network. wired mac information collected from APs.

monitored-ap-wm — Clear monitored AP wired mac information collected from APs.

prop-eth-mac — Clear wired mac information collected from APs.

reg-ap-oui — Clear registered AP OUIOrganizationally Unique Identifier. Synonymous with company ID or vendor ID, an OUI is a 24-bit, globally unique assigned number, referenced by various standards. The first half of a MAC address is OUI. information collected from APs.

system-gw-mac — Clear system gatewayGateway is a network node that allows traffic to flow in and out of the network. mac information learned at the controller .

system-wired-mac — Clear system wired mac information learned at the controller.

wireless-device — Clear routers or potential wireless devices information.

Usage Guidelines

The clear command clears the specified parameters of their current values.

Example

The following command clears all aaa counters for all authentication servers:

(host) [mynode] #clear aaa authentication-server all

Command History

Release

Modification

ArubaOS 8.3.0.0

The <port> sub-parameter was added to the port parameter.

ArubaOS 8.2.0.0

The following parameters were added:

master-local

mon-serv

mon-serv-fwv

perf-test

web-cc md

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable and Config mode on Mobility Master.

/*]]>*/