You are here: Home > CLI Commands > Just_CLI_Topics > clock summer-time recurring

clock summer-time recurring

clock summer-time <WORD> recurring

<1-4> <start day> <start month> <hh:mm>

first <start day> <start month> <hh:mm>

last <start day> <start month> <hh:mm>

<1-4> <end day> <end month> <hh:mm>

first <end day> <end month> <hh:mm>

last <end day> <end month> <hh:mm>

Description

This command sets the software clock to begin and end daylight savings time on a recurring basis.

Syntax

Parameter

Description

Range

<WORD>

Abbreviation for your time zone. For example, PDT for Pacific Daylight Time.

3-5 characters

<1-4>

Enter the week number to start and end daylight savings time. For example, enter 2 to start daylight savings time on the second week of the month.

1-4

first

Enter the keyword first to have the time change begin or end on the first week of the month.

last

Enter the keyword last to have the time change begin or end on the last week of the month.

<start day>

Enter the weekday when the time change begins or ends.

Sunday-Saturday

<start month>

Enter the month when the time change begins or ends.

January-December

<hh:mm>

Enter the time, in hours and minutes, that the time change begins or ends.

24 hours

Usage Guidelines

This command subtracts exactly 1 hour from the configured time.

The WORD can be any alphanumeric string, but cannot start with a colon (:). A WORD longer than five characters is not accepted. If you enter a WORD containing punctuations, the command is accepted, but the timezone is set to UTCCoordinated Universal Time. UTC is the primary time standard by which the world regulates clocks and time..

You can configure the time to change on a recurring basis. To do so, set the week, day, month, and time when the change takes effect (daylight savings time starts). You must also set the week, day, month, and time when the time changes back (daylight savings time ends).

The start day requires the first three letters of the day. The start month requires the first three letters of the month.

You also have the option to set the number of hours by which to offset the clock from UTCCoordinated Universal Time. UTC is the primary time standard by which the world regulates clocks and time.. This has the same effect as the clock timezone command.

Example

The following example sets daylight savings time to occur starting at 2:00 AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode. on Sunday in the second week of March, and ending at 2:00 AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode. on Sunday in the first week of November. The example also sets the name of the time zone to PST with an offset of UTCCoordinated Universal Time. UTC is the primary time standard by which the world regulates clocks and time. - 8 hours.

(host) [mynode] (config) #clock summer-time PST recurring 2 Sun Mar 2:00 first Sun Nov 3:00 -8

Related Commands

Command

Description

show clock

Displays the system clock, configured for daylight savings.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/