You are here: Home > CLI Commands > Just_CLI_Topics > cluster-member-factory-cert

cluster-member-factory-cert

cluster-member-factory-cert member-mac <mac>

Description

This command sets the managed device as a CPsecControl Plane Security. CPsec is a secure form of communication between a controller and APs to protect the control plane communications. This is performed by means of using public-key self-signed certificates created by each master controller. cluster root, and specifies a custom user-installed certificate for authenticating cluster members.

Syntax

Parameter

Description

<mac>

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the user-installed certificate on the cluster member.

Usage Guidelines

To define a controller as a cluster root, issue one of the following commands on that controller:

cluster-member-custom-cert: Define the managed device as a cluster root, and select a user-installed certificate to authenticate that cluster member.

cluster-member-factory-cert: Define the managed device as a cluster root, and select a factory-installed certificate to authenticate that cluster member.

cluster-member-ip : Define the Managed device as a cluster root, and set the IPsecInternet Protocol security. IPsec is a protocol suite for secure IP communications that authenticates and encrypts each IP packet in a communication session. key to authenticate that cluster member.

 

For information on installing certificates on your controller, refer toManaging Certificates.

Example

The following command sets the managed device on which you issue command as a root managed device, and adds the managed device 172.21.18.18 as a cluster member with the IPsecInternet Protocol security. IPsec is a protocol suite for secure IP communications that authenticates and encrypts each IP packet in a communication session. key ipseckey1:

(host) (config) #cluster-member-factory-cert member-mac 00:1E:37:CB:D4:52

Related Commands

Parameter

Description

control-plane-security

Configure the CPsecControl Plane Security. CPsec is a secure form of communication between a controller and APs to protect the control plane communications. This is performed by means of using public-key self-signed certificates created by each master controller. profile.

show cluster-config

Show the multi-master cluster configuration for the CPsecControl Plane Security. CPsec is a secure form of communication between a controller and APs to protect the control plane communications. This is performed by means of using public-key self-signed certificates created by each master controller. feature.

show cluster-switches

Issue this command on a Mobility Master using CPsecControl Plane Security. CPsec is a secure form of communication between a controller and APs to protect the control plane communications. This is performed by means of using public-key self-signed certificates created by each master controller. in a multi-master environment to show other managed devices to which it is connected.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config mode on managed devices.

/*]]>*/