You are here: Home > CLI Commands > Just_CLI_Topics > cm_mu_snr_thresh

cm_mu_snr_thresh

cm-mu-snr-thresh <value>

Description

This ClientMatch command configures the Signal to Noise Ratio (SNRSignal-to-Noise Ratio. SNR is used for comparing the level of a desired signal with the level of background noise.) threshold for a multi-user-capable (MU-capable) radio.

Syntax

Parameter

Description

Range

Default

value <dB>

Minimum SNRSignal-to-Noise Ratio. SNR is used for comparing the level of a desired signal with the level of background noise. value of a client on the target radio, in which the radio can still be considered for MU-steering.

> 25

30

Usage Guidelines

The cm-mu-snr-thresh value must be greater than the cm-sticky-snr value for a MU-capable client to be steered to that radio.

Example

The following example configures an SNRSignal-to-Noise Ratio. SNR is used for comparing the level of a desired signal with the level of background noise. threshold of 90 on a MU-MIMOMulti-User Multiple-Input Multiple-Output. MU-MIMO is a set of multiple-input and multiple-output technologies for wireless communication, in which users or wireless terminals with one or more antennas communicate with each other. -capable radio:

(host)(config) #cm-mu-snr-thresh <90>

Command History

Version

Description

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system, except for noted parameters.

Config mode on Mobility Master.

/*]]>*/