You are here: Home > CLI Commands > Just_CLI_Topics > configuration device

configuration device

configuration device

default-node <node-path>

<mac-address> device-model {A7005|A7008|A7010|A7024|A7030|A7205|A7210|A7220|A7240|A7240XM|A7280|MC-VA} [<config-path>]|move-to[<dest-path>][<mac-address-2>]

Description

This command maps a device to an existing node in the configuration hierarchy.

Syntax

Parameter

Description

default-node <node-path>

Specifies the node to which any device without explicit device-node mapping is attached. If a default node is not configured, unknown devices cannot connect to Mobility Master.

<mac-address>

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network.  address of a device that must be mapped to a node in the configuration hierarchy.

device-model

Model number for the device:

A7005

A7008

A7010

A7024

A7030

A7205

A7210

A7220

A7240

A7240XM

A7280

MC-VAVirtual Appliance. VA is a pre-configured virtual machine image, ready to run on a hypervisor.

<config-path>

Full configuration path to which the device is mapped. If the path is not specified, the device is mapped to the current node.

move-to <dest-path>

Moves the device to the specified configuration path of the destination node.

<mac-address-2>

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network.  address of the destination node in the configuration hierarchy.

Usage Guidelines

The node to which the device is mapped is specified by the node-path, which can be an absolute path from the root node or relative path from the current node. If the node-path is not specified, the device is mapped to the current node. A device-specific node is created to store the configuration for the device. The node is named using the specified MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the device.

Use the show configuration devices command to view the complete list of devices provisioned on your Mobility Master, and the show configuration node-hierarchy command to view the list of all nodes in the configuration hierarchy.

Example

The following command specifies /md as the default node:

(host) [mynode] (config) #configuration device default-node /md

Command History

Release

Modification

ArubaOS 8.3.0.0

The A7280option was added under the device-model parameter.

ArubaOS 8.2.0.0

The move-to, dest-path, and mac-address-2 parameters were added.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/