You are here: Home > CLI Commands > Just_CLI_Topics > controller ble-init-action

controller ble-init-action

controller ble-init-action apb-power-reset | clear-all-beacons | clear-all-log-mac-filters | clear-log-mac-filter | log-level | log-level-str |log-mac-filter | msg-select |

ota-fw-upgrade | remove-beacon-mac | send-apb-update | send-update | start-log | stop-log | zigbee permit-joining restart <all> | <mac>

Description

This command will initiate BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. action for controller.

Syntax

Parameter

Description

apb-power-reset

This parameter will power-on reset for the on-board BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. radio.

clear-all-beacons

This parameter will delete all beacon data.

clear-all-log-mac-filters

This parameter will clear all the BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. daemon log MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. filters.

clear-log-mac-filter

This parameter will clear the BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. daemon log MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. filter.

log-level

BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. daemon log level specified as a number

log-level-str

BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. daemon log levels specified as comma-separated

values (without quotes). Possible values:

'info','warning','error','ageout','bmreq','fw-upgrade','

fw-upgradeerr','cfgupdate,'cfgupdateerr','beacon','bcntl

v','bcnerr','apb','tags','zf','amon','iot_gw','at-https-

json','at-websocket-protobuf'.

log-mac-filter

BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. daemon log MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. filter

msg-select

Sets bits to enable specific messages from APB to

controller BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. Daemon - refer to BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. config CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. cmd

ota-fw-upgrade

Over the Air firmware upgrade for onboard BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption.

remove-beacon-mac

Deletes beacon with matching MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address

send-apb-update

Sends APB info update to BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. Relay on controller

send-update

Sends IoTInternet of Things. IoT refers to the internetworking of devices that are embedded with electronics, software, sensors, and network connectivity features allowing data exchange over the Internet. payload message to BMCBeacon Management Console. BMC manages and monitors beacons from the BLE devices. The BLE devices are used for location tracking and proximity detection. immediately

start-log

Enables BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. Daemon logging

stop-log

Disables BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. Daemon logging

zigbee permit-joining restart

Re-starts zigbee initial permit joining duration

all

Re-starts all devices

mac <mac-address>

Re-starts specific devices

Example

(host) [mynode] #controller ble-init-action stop-log

Command History

Release

Description

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platform

License

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/