You are here: Home > CLI Commands > Just_CLI_Topics > database-synchronize

database-synchronize

database-synchronize

Description

This command synchronizes the Mobility Master database with a standby or backup Mobility Master.

Syntax

No parameters.

Usage Guidelines

This command should be executed from the enable mode of the Mobility Master and takes effect immediately. If a peer is not configured, the Mobility Master displays an error message Cannot start database synchronization: peer is not configured.

Example

The following command invokes the database on the active Mobility Master to synchronize with the standby:

(host) [mynode] #database-synchronize

Related Commands

Command

Description

database synchronize

This command configures the Mobility Master to synchronizes the database with a standby or backup Mobility Master. This works in config mode.

show database

This command displays database synchronization status.

Command History

Version

Description

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/