You are here: Home > CLI Commands > Just_CLI_Topics > disaster-recovery

disaster-recovery

disaster-recovery

off

on

Description

This command enables or disables disaster recovery mode on the managed device.

Syntax

Parameter

Description

off

Disables disaster recovery mode.

on

Enables disaster recovery mode.

Usage Guidelines

This command is used to recover operations on a managed device that has inherited an incorrect configuration from the Mobility Master and can no longer communicate with the Mobility Master. When disaster-recovery is enabled, the configuration inherited from the Mobility Master can be modified locally on the managed device. When disaster-recovery mode is disabled, the managed device will synchronize its configuration with the Mobility Master and any local configuration changes on the managed device will be overwritten.

An example could be a configuration change on the Mobility Master that has modified VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. or port information on the managed device that breaks the IPSEC connection between them. An administrator can enable disaster-recovery mode and correct the configuration on the managed device to restore connectivity to the Mobility Master.

Example

The following command enables the disaster recovery mode in the managed device:

(host-md) #disaster-recovery on

 

*******************************

Entering disaster recovery mode

*******************************

(DR-Mode) [mm] #

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platform

License

Command Mode

All platforms

Base operating system.

Enable mode on Managed device.

/*]]>*/