You are here: Home > CLI Commands > Just_CLI_Topics > dot1x

dot1x

 

high-watermark <1-32000>

stm-throttling percent <10-80> {multi-version}

 

Use this command only under the supervision of Aruba support.

Description

Use this command under the guidance of Aruba support to configure the maximum and minimum thresholds for the table that contains 802.1X802.1X is an IEEE standard for port-based network access control designed to enhance 802.11 WLAN security. 802.1X provides an authentication framework that allows a user to be authenticated by a central authority. sessions.

Syntax

Parameter

Description

Range

high-watermark

The maximum entries in the Active table. When the number of entries in the Active table reaches the High Water Mark value, new requests are queued on the Pending table.

1-32000 entries

stm-throttling-percent <10-80>

Enables STMStation Management. STM is a process that handles AP management and user association. throttling when the total entries in the Pending table are greater than (stm-throttling percent) * (high watermark). The default STMStation Management. STM is a process that handles AP management and user association. throttling percent is 50%.

10-80%

multi-version

Enables dummy multi-version check.

 

Example

The following command sets the High Water Mark value to 200 entries:

(host) [mynode] (config) #dot1x high-watermark 200

Related Commands

Command

Description

show dot1x watermark

Displays information about the table that contains 802.1X802.1X is an IEEE standard for port-based network access control designed to enhance 802.11 WLAN security. 802.1X provides an authentication framework that allows a user to be authenticated by a central authority. sessions.

Command History

Release

Modification

ArubaOS 8.2.0.0

The multi-version sub-parameter was added.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/