You are here: Home > CLI Commands > Just_CLI_Topics > iap trusted-branch-db

iap trusted-branch-db

iap trusted-branch-db

add {mac-address <mac-address>}

allow-all

del {mac-address <mac-address>}

del-all

Description

This command is used to configure an Instant AP (IAP)-VPNVirtual Private Network. VPN enables secure access to a corporate network when located remotely. It enables a computer to send and receive data across shared or public networks as if it were directly connected to the private network, while benefiting from the functionality, security, and management policies of the private network. This is done by establishing a virtual point-to-point connection through the use of dedicated connections, encryption, or a combination of the two. branch as trusted.

Syntax

Parameter

Description

add

Configure an IAP trusted branch entry.

mac-address <mac-address>

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. -address of the IAP.

allow-all

Configure all branches as trusted.

del

Delete an IAP trusted branch entry.

mac-address <mac-address>

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. -address of the IAP.

del-all

Delete all trusted branch entries.

Example

The following command configures a specific IAP-VPNVirtual Private Network. VPN enables secure access to a corporate network when located remotely. It enables a computer to send and receive data across shared or public networks as if it were directly connected to the private network, while benefiting from the functionality, security, and management policies of the private network. This is done by establishing a virtual point-to-point connection through the use of dedicated connections, encryption, or a combination of the two. branch as trusted:

(host) [mynode] #iap trusted-branch-db add mac-address 01:01:0e:3e:4c:33

The following is the output of the above command:

Trusted branch added

This following command configures all IAP-VPNVirtual Private Network. VPN enables secure access to a corporate network when located remotely. It enables a computer to send and receive data across shared or public networks as if it were directly connected to the private network, while benefiting from the functionality, security, and management policies of the private network. This is done by establishing a virtual point-to-point connection through the use of dedicated connections, encryption, or a combination of the two. branches as trusted:

(host) [mynode] #iap trusted-branch-db allow-all

All IAP+VPN branches are trusted

Related Commands

Command

Description

show iap detailed-table

This command displays the IAP trusted branch table.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system, except for noted parameters.

Config or Enable mode on Mobility Master.

/*]]>*/