You are here: Home > CLI Commands > Just_CLI_Topics > iot usetransportProfile

iot usetransportProfile

iot usetransportProfile <iot-profile-name>

Description

This command sets an IoTInternet of Things. IoT refers to the internetworking of devices that are embedded with electronics, software, sensors, and network connectivity features allowing data exchange over the Internet. management server profile. You can set up to four management server profiles.

Example

Execute the following command to set an IoTInternet of Things. IoT refers to the internetworking of devices that are embedded with electronics, software, sensors, and network connectivity features allowing data exchange over the Internet. transport profile:

(host) [mynode] (config)# iot usetransportProfile sample

Related Commands

Command

Description

iot transportProfile

Configures an IoTInternet of Things. IoT refers to the internetworking of devices that are embedded with electronics, software, sensors, and network connectivity features allowing data exchange over the Internet. transport profile.

show iot transportProfile

Shows the IoTInternet of Things. IoT refers to the internetworking of devices that are embedded with electronics, software, sensors, and network connectivity features allowing data exchange over the Internet. profile status.

Command History

Version

Modification

ArubaOS 8.3.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Configuration mode on Mobility Master.

/*]]>*/