You are here: Home > CLI Commands > Just_CLI_Topics > ip dhcp increase-increase-limit

ip dhcp increase-lease-limit

ip dhcp increase-lease-limit

Description

This command configures additional DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  scope that is twice the user limit on specific controller platforms.

Syntax

No parameter.

Usage Guidelines

This feature is disabled by default. This command can be used only in any of the following controller platforms: 7005 Controller, 7008 Controller, or 7010 Controller.

Example

To enable the additional DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  scope on a controller, execute the following command:

(host) (config) #ip dhcp increase-lease-limit

Related Commands

Command

Description

show ip dhcp

Shows the DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  pool statistics.

Command History

Release

Modification

ArubaOS 8.2.0.0

Command introduced.

Command Information

Platform

License

Command Mode

7005 Controller, 7008 Controller, and 7010 Controller platforms

Base operating system.

Config mode on the Managed Device or controller.

/*]]>*/