You are here: Home > CLI Commands > Just_CLI_Topics > ip dhcp load-balance

ip dhcp load-balance

ip dhcp load-balance priority

round-robin {ipupsell | private | public}

strict {ipupsell | private | public}

Description

This command configures the DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  pool load balancing priority.

Syntax

Parameter

Description

round-robin

Enable a round-robin priority.

ipupsell

Configure the DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  pool as an IP upsell pool.

private

Configure the DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  pool as private.

public

Configure the DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  pool as public.

strict

Enable a strict priority.

ipupsell

Configure the DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  pool as an IP upsell pool.

private

Configure the DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  pool as private.

public

Configure the DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  pool as public.

Example

The following command DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  pool load balancing priority:

(host) [mynode] (config) #ip dhcp load-balance priority round-robin private

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platform

License

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/