You are here: Home > CLI Commands > Just_CLI_Topics > ip-flow-export-profile

ip-flow-export-profile

ip-flow-export-profile

collector-ip <collector-ip>

enable

flow-cache-size <flow-cache-size>

no

observation-domain <observation-domain>

port <port>

transport-protocol {tcp | udp}

upload-all-interval <upload-all-interval>

upload-snapshot-interval <upload-snapshot-interval>

upload-template-interval <upload-template-interval>

wireless-export

Description

This command configures the IP flow collector profile. This command should be configured under /md.

Syntax

Parameter

Description

Range

Default

collector-ip <collector-ip>

Assigns a managed device as the IP Flow Collector within its node.

 

 

enable

Enables the IP Flow Collector.

 

 

flow-cache-size <flow-cache-size>

Determines the maximum number of entries a managed device can cache before the log is exported to the IP Flow Collector.

5000–25000

 

no

Negates the prior configuration.

 

 

observation-domain <observation-domain>

Allows the IP Flow Collector to group managed devices when receiving data sessions.

 

Switch IP as 32 Bit number

port <port>

Assigns the port to which the exported caches are sent on the IP Flow Collector.

 

 

transport-protocol

Determines the transport protocol when a cache is exported.

 

 

tcp

Assigns TCPTransmission Control Protocol. TCP is a communication protocol that defines the standards for establishing and maintaining network connection for applications to exchange data. as the transfer protocol .

 

 

udp

Assigns UDPUser Datagram Protocol. UDP is a part of the TCP/IP family of protocols used for data transfer. UDP is typically used for streaming media. UDP is a stateless protocol, which means it does not acknowledge that the packets being sent have been received. as the transfer protocol.

 

 

upload-all-interval <upload-all-interval>

Determines the maximum time interval allowed before a managed device must export its cache to the IP Flow Collector.

0–30 minutes

0 to disable

 

upload-snapshot-interval <upload-snapshot-interval>

Determines the maximum time interval cache for an inactive flow is exported.

0–30 minutes

0 to diable

 

upload-template-interval <upload-template-interval>

Determines the maximum time interval to upload IPFIX templates.

0–30 minutes

0 to disable

0

wireless-export

Enables wireless export.

 

Disabled

Example

The following command configures a DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  pool:

(host) [mynode] (config) #ip-flow-export-profile

(host) [mynode] (IP Flow Collector Profile) #enable

(host) [mynode] (IP Flow Collector Profile) #collector-ip 192.0.2.1

(host) [mynode] (IP Flow Collector Profile) #write memory

Related Commands

Command

Description

show ip-flow-export wireless-cache

Displays the cache for WLANWireless Local Area Network. WLAN is a 802.11 standards-based LAN that the users access through a wireless connection. information.

Command History

Release

Modification

ArubaOS 8.0.1.0

The wireless-export parameter was introduced.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config mode on the Mobility Master.

/*]]>*/