You are here: Home > CLI Commands > Just_CLI_Topics > ip local

ip local

ip local pool <pool_name> <pool_start_address> [<pool_end_address>]

Description

This command configures a local IP pool for Layer-2 Tunnel Protocol (L2TPLayer-2 Tunneling Protocol. L2TP is a networking protocol used by the ISPs to enable VPN operations. ).

Syntax

Parameter

Description

pool <pool_name>

Name for the address pool.

<pool_start_address>

Starting IP address for the pool.

<pool_end_address>

(Optional) Ending IP address for the pool.

Usage Guidelines

VPNVirtual Private Network. VPN enables secure access to a corporate network when located remotely. It enables a computer to send and receive data across shared or public networks as if it were directly connected to the private network, while benefiting from the functionality, security, and management policies of the private network. This is done by establishing a virtual point-to-point connection through the use of dedicated connections, encryption, or a combination of the two. clients can be assigned IP addresses from the L2TPLayer-2 Tunneling Protocol. L2TP is a networking protocol used by the ISPs to enable VPN operations. pool.

Example

The following command configures an L2TPLayer-2 Tunneling Protocol. L2TP is a networking protocol used by the ISPs to enable VPN operations. pool:

(host) [mynode] (config) #ip local pool pool-l2tp 10.1.1.1 10.1.1.99

Command History

Version

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platform

License

Command Mode

All platforms

Available in the base operating system.

Config mode on Mobility Master.

/*]]>*/