You are here: Home > CLI Commands > Just_CLI_Topics > ip nat

ip nat

ip nat pool <name> <start-ipaddr> <end-ipaddr> [<dest-ipaddr> <static>]

Description

This command configures a pool of IP addresses for network address translation (NATNetwork Address Translation. NAT is a method of remapping one IP address space into another by modifying network address information in Internet Protocol (IP) datagram packet headers while they are in transit across a traffic routing device.).

Syntax

Parameter

Description

<name>

Name of the NATNetwork Address Translation. NAT is a method of remapping one IP address space into another by modifying network address information in Internet Protocol (IP) datagram packet headers while they are in transit across a traffic routing device. pool.

<start-ipaddr>

IP address that defines the beginning of the range of source NATSource NAT changes the source address of the packets passing through the router. Source NAT is typically used when an internal (private) host initiates a session to an external (public) host. addresses in the pool.

<end-ipaddr>

IP address that defines the end of the range of source NATSource NAT changes the source address of the packets passing through the router. Source NAT is typically used when an internal (private) host initiates a session to an external (public) host. addresses in the pool.

<dest-ipaddr>

Destination NATNetwork Address Translation. NAT is a method of remapping one IP address space into another by modifying network address information in Internet Protocol (IP) datagram packet headers while they are in transit across a traffic routing device. IP address.

<static>

Map the NATNetwork Address Translation. NAT is a method of remapping one IP address space into another by modifying network address information in Internet Protocol (IP) datagram packet headers while they are in transit across a traffic routing device. pool on a one-to-one basis.

Usage Guidelines

This command configures a NATNetwork Address Translation. NAT is a method of remapping one IP address space into another by modifying network address information in Internet Protocol (IP) datagram packet headers while they are in transit across a traffic routing device. pool which you can reference in a session ACLAccess Control List. ACL is a common way of restricting certain types of traffic on a physical port. rule (see ip access-list session).

Example

The following command configures a NATNetwork Address Translation. NAT is a method of remapping one IP address space into another by modifying network address information in Internet Protocol (IP) datagram packet headers while they are in transit across a traffic routing device. pool:

(host) [mynode] (config) #ip nat pool 2net 2.1.1.1 2.1.1.125

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Next Generation Policy Enforcement Firewall (PEFNG) license.

Config mode on Mobility Master.

/*]]>*/