You are here: Home > CLI Commands > Just_CLI_Topics > ip probe default

ip probe default

ip probe default

burst-size <size>

frequency <seconds>

mode ping

no

retries <count>

Description

This command configures IP probes for the policy-based routing using a next-hop list.

Syntax

Parameter

Description

Range

Default

burst-size <size>

Number of probes to be sent during the probe frequency interval defined by the frequency parameter of this profile.

1-16

5

frequency <seconds>

Probe interval, in seconds. The WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. health-check feature sends the number of probes defined by the burst-size parameter during each frequency interval defined by this frequency parameter.

10-3600

10

mode ping

Enable this feature by issuing the mode ping command. Ping is the only mode currently supported by this feature.

no

Remove or negate any configured parameter.

retries <count>

Number of times the managed device attempts to resend a probe.

1-255

3

Usage Guidelines

The health-check feature uses ping-probes to check reachability and latency from the managed device to data center though each of the managed device's WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. up-links. Latency is calculated based on the round-trip time (RTT) of ping responses. Ping settings are configured globally using the ip probe default command.

Examples

The following commands enable this feature, and reduce the default probe frequency interval and probe burst size:

(host) [mynode] (config) #ip probe default

(host) ^[mynode] (config-submode)#burst-size 3

(host) ^[mynode] (config-submode)#frequency 5

(host) ^[mynode] (config-submode)#mode ping

Related Commands

Command

Description

ip probe health-check

This command configures WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. health-check ping-probes for measuring WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. availability and latency on managed device up-links.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platform

License

Command Mode

All platforms

Available in the base operating system.

Config mode on Mobility Master.

/*]]>*/