You are here: Home > CLI Commands > Just_CLI_Topics > ip tunnel

ip tunnel pool

ip tunnel pool <pool-name>

distributed range <startip> <endip>

no

Description

This command configures the DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  address pool for remote IP address distribution. This command should be configured from the /md node hierarchy.

Syntax

Parameter

Description

distributed range <startip> <endip>

Configures the DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  address pool for remote IP address distribution.

no

Remove or negate any configured parameter.

Example

The following command configures the DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  address pool for remote IP address distribution:

(host) [md] (config) #ip tunnel pool corp-tunnel-remote

(host) ^[md] (config-submode)#distributed range 10.0.0.1 10.0.0.100

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platform

License

Command Mode

All platforms

Available in the base operating system.

Config mode on Mobility Master.

/*]]>*/