You are here: Home > CLI Commands > Just_CLI_Topics > ip vlan

ip vlan pool

ip vlan pool <pool-name>

distributed range <startip> <endip>

no

Description

This command configures the VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. address pool for remote IP address distribution. This command should be configured from the /md node hierarchy.

Syntax

Parameter

Description

Range

Default

distributed range <startip> <endip>

Configures the VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. address pool for remote IP address distribution.

no

Remove or negate any configured parameter.

Example

The following command configures the VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. address pool for remote IP address distribution:

(host) [md] (config) #ip VLAN pool corp-vlan-remote

(host) ^[md] (config-submode)#distributed range 10.0.0.1 10.0.0.100

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platform

License

Command Mode

All platforms

Available in the base operating system.

Config mode on Mobility Master.

/*]]>*/