You are here: Home > CLI Commands > Just_CLI_Topics > ipv6 default-gateway

ipv6 default-gateway

ipv6 default-gateway mgmt <ipv6-address> <cost>

Description

This command configures an IPv6 default gatewayGateway is a network node that allows traffic to flow in and out of the network..

Syntax

Parameter

Description

mgmt

Specify the Management Interface.

<ipv6-address>

Specify the IPv6 address of the default gatewayGateway is a network node that allows traffic to flow in and out of the network..

cost

Specify the distance metric to select the routing protocol that determines the way to learn the route.

Usage Guidelines

This command configures an IPv6 default gatewayGateway is a network node that allows traffic to flow in and out of the network..

Example

The following command configures an IPv6 default gatewayGateway is a network node that allows traffic to flow in and out of the network.:

(host) [/md] (config) #ipv6 default-gateway 2cce:205:160:100::fe 1

The following example displays the use of extended scope of address range:

(host) [/md] (config) #ipv6 default-gateway 2014::1

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

Available on all platforms

Available in the base operating system.

Config mode on Mobility Master.

/*]]>*/