You are here: Home > CLI Commands > Just_CLI_Topics > lacp group

lacp group

lacp group <group_number> mode {active | passive}

Description

Enable LACPLink Aggregation Control Protocol. LACP is used for the collective handling of multiple physical ports that can be seen as a single channel for network traffic purposes. and configure LACPLink Aggregation Control Protocol. LACP is used for the collective handling of multiple physical ports that can be seen as a single channel for network traffic purposes. on the interface.

Parameter

Description

<group_number>

Enter the LAGLink Aggregation Group . A LAG combines a number of physical ports together to make a single high-bandwidth data path. LAGs can connect two switches to provide a higher-bandwidth connection to a public network. number.

Range: 0-7

mode {active | passive}

Enter the keyword mode followed by either the keyword active or passive.

Active mode—the interface is in active negotiating state. LACPLink Aggregation Control Protocol. LACP is used for the collective handling of multiple physical ports that can be seen as a single channel for network traffic purposes. runs on any link that is configured to be in the active state. The port in an active mode also automatically initiates negotiations with other ports by initiating LACPLink Aggregation Control Protocol. LACP is used for the collective handling of multiple physical ports that can be seen as a single channel for network traffic purposes. packets.

Passive mode—the interface is not in an active negotiating state. LACPLink Aggregation Control Protocol. LACP is used for the collective handling of multiple physical ports that can be seen as a single channel for network traffic purposes. runs on any link that is configured in a passive state. The port in a passive mode responds to negotiations requests from other ports that are in an active state. Ports in passive state respond to LACPLink Aggregation Control Protocol. LACP is used for the collective handling of multiple physical ports that can be seen as a single channel for network traffic purposes. packets.

Usage Guidelines

LACPLink Aggregation Control Protocol. LACP is used for the collective handling of multiple physical ports that can be seen as a single channel for network traffic purposes. is disabled by default; this command enables LACPLink Aggregation Control Protocol. LACP is used for the collective handling of multiple physical ports that can be seen as a single channel for network traffic purposes.. If the group number assigned contains static port members, the command is rejected.

Related Command

Command

Description

show lacp

View the LACPLink Aggregation Control Protocol. LACP is used for the collective handling of multiple physical ports that can be seen as a single channel for network traffic purposes. configuration status.

show interface port-channel

View information on a specified port channel interface.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platform

License

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/