You are here: Home > CLI Commands > Just_CLI_Topics > lacp port-priority

lacp port-priority

lacp port-priority <priority_value>

Description

Configure the LACPLink Aggregation Control Protocol. LACP is used for the collective handling of multiple physical ports that can be seen as a single channel for network traffic purposes. port priority.

Syntax

Parameter

Description

<priority value>

Enter the port-priority value. The higher the value number the lower the priority.

Range: 1 to 65535

Default: 255

Usage Guidelines

Set the port priority for LACPLink Aggregation Control Protocol. LACP is used for the collective handling of multiple physical ports that can be seen as a single channel for network traffic purposes..

Related Commands

Command

Description

lacp group

Enable LACPLink Aggregation Control Protocol. LACP is used for the collective handling of multiple physical ports that can be seen as a single channel for network traffic purposes. and configure on the interface.

show lacp

View the LACPLink Aggregation Control Protocol. LACP is used for the collective handling of multiple physical ports that can be seen as a single channel for network traffic purposes. configuration status.

show interface port-channel

View information on a specified port channel interface.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platform

License

Command Mode

All Platforms

Base operating system.

Configuration Interface Mode (config-if) for Mobility Master.

/*]]>*/