You are here: Home > CLI Commands > Just_CLI_Topics > lc-cluster start-vlan-probe

lc-cluster start-vlan-probe

lc-cluster start-vlan-probe

Description

This command is used to trigger a VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. probe on the managed devices.

Syntax

No syntax.

Usage Guidelines

After removing the VLANsVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. using the command, lc-cluster exclude-vlan, execute this command to re-run the VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. probing algorithm.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable mode on Managed Device.

/*]]>*/