You are here: Home > CLI Commands > Just_CLI_Topics > local-peer-mac

local-peer-mac

local-peer-mac <local-mac-addr> ipsec <localkey>

Description

This command is used to configure security peer-mac based between Mobility Master and managed devices.

Syntax

Parameter

Description

local-mac-addr

Enter the managed device's MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address.

ipsec localkey

Configure the value of the IKEInternet Key Exchange. IKE is a key management protocol used with IPsec protocol to establish a secure communication channel. IKE provides additional feature, flexibility, and ease of configuration for IPsec standard. PSKPre-shared key. A unique shared secret that was previously shared between two parties by using a secure channel. This is used with WPA security, which requires the owner of a network to provide a passphrase to users for network access. , it must be between 6-64 characters

Example

The following command configures the security peer-mac:

(host) [mynode] (config) #local-peer-mac 00:0c:29:00:00:00 ipsec 123456

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/