You are here: Home > CLI Commands > Just_CLI_Topics > loginsession

loginsession

loginsession timeout <minutes>

Description

This command configures the time management session (via Telnet or SSHSecure Shell. SSH is a network protocol that provides secure access to a remote device. ) remains active without user activity.

Syntax

Parameter

Description

Range

Default

timeout

Number of seconds or minutes that a management session remains active without any user activity.

5-60 minutes or 1-3600 seconds, 0 to disable

15 minutes

Usage Guidelines

The management user must re-login to the controller after a Telnet or SSHSecure Shell. SSH is a network protocol that provides secure access to a remote device. session times out. If you set the timeout value to 0, sessions do not time out. The TCPTransmission Control Protocol. TCP is a communication protocol that defines the standards for establishing and maintaining network connection for applications to exchange data. session timeout for wireless and wired user sessions through the controller is 15 minutes; this timeout for user sessions is not configurable.

Example:

The following command configures management sessions on the controller to not time out:

(host) [mynode] (config) #loginsession timeout 0

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Requires the PEFNGPolicy Enforcement Firewall. PEF also known as PEFNG provides context-based controls to enforce application-layer security and prioritization. The customers using Aruba mobility controllers can avail PEF features and services by obtaining a PEF license. PEF for VPN users—Customers with PEF for VPN license can apply firewall policies to the user traffic routed to a controller through a VPN tunnel. license.

Config mode on Mobility Master.

/*]]>*/