You are here: Home > CLI Commands > Just_CLI_Topics > master-l3redundancy

master-l3redundancy

master-l3redundancy

l3-peer-ip-address {<ipaddr> [ipsec <key>] [ipsec-custom-cert <peer-mac> <MAC address>] [ipsec-factory-cert <peer-mac> <MAC address>]}

l3-sync-state {None|Primary|Secondary}

l3-sync-time <timer>

Description

Use this command to configure Layer-3 redundancy for a Mobility Master.

Syntax

Parameter

Description

Default

l3-peer-ip-address

Configure L3 peer's ip address.

ipsec

Configure IPsecInternet Protocol security. IPsec is a protocol suite for secure IP communications that authenticates and encrypts each IP packet in a communication session. secure communication between Mobility Masters.

ipsec-custom-cert

Customer certificate-based IPsecInternet Protocol security. IPsec is a protocol suite for secure IP communications that authenticates and encrypts each IP packet in a communication session. secure communication between Mobility Masters.

ipsec-factory-cert

Factory certificate-based IPsecInternet Protocol security. IPsec is a protocol suite for secure IP communications that authenticates and encrypts each IP packet in a communication session. secure communication between Mobility Masters.

l3-sync-state

Sync state for L3 Redundancy .

None

No Sync state for L3 Redundancy.

Primary

Set Sync state for L3 Redundancy as Primary.

Secondary

Set Sync state for L3 Redundancy as Secondary.

l3-sync-time

Sync Time for L3 Redundancy.

timer

Sync time in Hours. Value is between (2-24) hours.

2 hours

Usage Guidelines

This command enables the Layer-3 redundancy. Peer-ip and sync-state functions are required for proper functioning of L3 Redundancy. They have to be individually executed in /mm/mynode of all the Mobility Masters involved in the redundancy.

Example

The following command enables you to configure Layer-3 redundancy.

(host) *[mynode] (config) #master-l3redundancy

(host) *[mynode] (config-submode)# #l3-peer-ip-address

(host) *[mynode] (config-submode)#l3-sync-state

(host) *[mynode] (config-submode)#l3-sync-time

Related Commands

Command

Description

show master-l3redundancy

Displays the current status of Layer-3-domain Mobility Master redundancy.

Command History

Release

Modification

ArubaOS 8.2.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

Available on all platforms

Base operating system.

Config mode on managed device.

/*]]>*/