You are here: Home > CLI Commands > Just_CLI_Topics > mgmt-server

mgmt-server

wlan

mgmt-server

primary-server <primary-server-ip> profile <profile-name> [secure] [transport{mix|udp|websocket}]

profile

default-acp

default-ale

default-amp

default-controller

<profile-name>

airgroupinfo-enable

clone <source>

inline-ap-stats

inline-auth-stats

inline-dhcp-stats

inline-dns-stats

location-enable

misc-enable

monitored-info-del-enable

monitored-info-enable

monitored-info-snapshot-enable

no

sessions-enable

stats-enable

tag-enable

uccmonitoring-enable

wids-event-info-enable

Description

This command configures the management server profile.

Syntax

Parameter

Description

primary-server <primary-server-ip>

profile <profile-name>

[secure|transport]

Associate the Mobility Master to ALEAnalytics and Location Engine. ALE gives visibility into everything the wireless network knows. This enables customers and partners to gain a wealth of information about the people on their premises. This can be very important for many different verticals and use cases. ALE includes a location engine that calculates associated and unassociated device location periodically using context streams, including RSSI readings, from WLAN controllers or Instant clusters. server or an AirWave management server by entering the IPv4 or IPv6 address of the server and specifying a management configuration profile.

secure

Enabling this specifies that DTLSDatagram Transport Layer Security. DTLS communications protocol provides communications security for datagram protocols.  mode is used.

transport

This defines the type of transport mechanism.

profile

Configure a new management server profile on the Mobility Master or to edit the default profiles.

airgroupinfo-enable

If enabled, the messages related to the AirGroupThe application that allows the end users to register their personal mobile devices on a local network and define a group of friends or associates who are allowed to share them. AirGroup is primarily designed for colleges and other institutions. AirGroup uses zero configuration networking to allow Apple mobile devices, such as the AirPrint wireless printer service and the AirPlay mirroring service, to communicate over a complex access network topology. feature will be sent to the management server.

clone <source>

Copy from another management configuration profile.

inline-ap-stats

Enable Clarity Live statistics from the AP.

inline-auth-stats

Enable Clarity Live statistics related to authentication.

inline-dhcp-stats

Enable Clarity Live statistics of DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network. .

inline-dns-stats

Enable Clarity Live statistics of DNSDomain Name System. A DNS server functions as a phone book for the intranet and Internet users. It converts human-readable computer host names into IP addresses and IP addresses into host names. It stores several records for a domain name such as an address 'A' record, name server (NS), and mail exchanger (MX) records. The Address 'A' record is the most important record that is stored in a DNS server, because it provides the required IP address for a network peripheral or element..

location-enable

If enabled, Station RSSIReceived Signal Strength Indicator. RSSI is a mechanism by which RF energy is measured by the circuitry on a wireless NIC (0-255). The RSSI is not standard across vendors. Each vendor determines its own RSSI scale/values. or AP Neighbor messages will be sent to the management server.

misc-enable

If enabled, the AP system statistics, specifications, and station steer information will be sent to the management server.

monitored-info-del-enable

Information is sent when a monitored AP or client is deleted.

monitored-info-enable

If enabled, the monitored AP or station information will be sent to the management server.

monitored-info-snapshot-enable

If enabled, the managed device sends a periodic snapshot about the state (up or down) of each monitored AP, client, rogue AP, or suspected rogue AP.

no

Negates or removes a parameter.

sessions-enable

If enabled, the firewallFirewall is a network security system used for preventing unauthorized access to or from a private network. DNA, application, and aggregate session messages will be sent to the management server.

stats-enable

If enabled, the statistics for AP radios, virtual APs, and clients are be sent to the management server.

tag-enable

If enabled, tag messages will be sent to the management server.

uccmonitoring-enable

If enabled, the messages about the unified communications manager are be sent to the management server.

wids-event-info-enable

If enabled, the controller sends messages about current IDSIntrusion Detection System. IDS monitors a network or systems for malicious activity or policy violations and reports its findings to the management system deployed in the network. events as soon as they are detected.

Usage Guideline

Register a management server with the Mobility Master by specifying the IP address of an AirWave management server or ALEAnalytics and Location Engine. ALE gives visibility into everything the wireless network knows. This enables customers and partners to gain a wealth of information about the people on their premises. This can be very important for many different verticals and use cases. ALE includes a location engine that calculates associated and unassociated device location periodically using context streams, including RSSI readings, from WLAN controllers or Instant clusters. that should receive messages from the Mobility Master using the AMONAdvanced Monitoring. AMON is used in Aruba WLAN deployments for improved network management, monitoring and diagnostic capabilities. protocol. You must also specify the management configuration profile in which the AMONAdvanced Monitoring. AMON is used in Aruba WLAN deployments for improved network management, monitoring and diagnostic capabilities. message filtering settings can be done. The default profiles provided for the AirWave server (default-amp) and ALEAnalytics and Location Engine. ALE gives visibility into everything the wireless network knows. This enables customers and partners to gain a wealth of information about the people on their premises. This can be very important for many different verticals and use cases. ALE includes a location engine that calculates associated and unassociated device location periodically using context streams, including RSSI readings, from WLAN controllers or Instant clusters. (default-ale) are editable using this command.

The IDSIntrusion Detection System. IDS monitors a network or systems for malicious activity or policy violations and reports its findings to the management system deployed in the network. WLANWireless Local Area Network. WLAN is a 802.11 standards-based LAN that the users access through a wireless connection. management system (WMS) on the managed device monitors wireless traffic to detect any new AP or wireless client station that tries to connect to the network. ArubaOS can send Clarity Live and user serviceability statistics from a managed device to a management server, which can use this data to identify the client connectivity issues.

A managed device can also collect information about each step in the use authentication process, and send these records to a management server in the AMONAdvanced Monitoring. AMON is used in Aruba WLAN deployments for improved network management, monitoring and diagnostic capabilities. format, the data transport protocol used to communicate basic statistics or state changes to the management servers such as AirWave or ALEAnalytics and Location Engine. ALE gives visibility into everything the wireless network knows. This enables customers and partners to gain a wealth of information about the people on their premises. This can be very important for many different verticals and use cases. ALE includes a location engine that calculates associated and unassociated device location periodically using context streams, including RSSI readings, from WLAN controllers or Instant clusters..

Example

The following command defines a primary AirWave Management server.

(host) [mynode] (config) #mgmt-server primary-server 192.0.2.10 profile default-amp

Related Commands

Command

Description

ids management-profile

Manage the events correlation for IDSIntrusion Detection System. IDS monitors a network or systems for malicious activity or policy violations and reports its findings to the management system deployed in the network. event traps and syslogs (logs).

ids wms-local-system-profile

This command configures the WLANWireless Local Area Network. WLAN is a 802.11 standards-based LAN that the users access through a wireless connection. management system (WMS) service to terminate on individual managed devices instead of Mobility Master.

Command History

Release

Modification

ArubaOS 8.1.0.0

The following changes were introduced:

The primary-server parameter was modified to accept IPv6 address.

The Clarity Live parameters such as inline-ap-stats, inline-auth-stats, inline-dhcp-stats, and inline-dns-stats were introduced.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/