You are here: Home > CLI Commands > Just_CLI_Topics > mobility-manager

mobility-manager

mobility-manager <A.B.C.D> [user <word>] <string> [auth-prot {md5 | sha} <srting>] [interval <secs>] [retrycount <count>] [rtls <rtls-portnumber>] [trap-version {1 | 2c | 3}] [udp-port <portnumber>]

Description

Use the command to allow a managed device to communicate with a mobility manager server (MMS).

Syntax

Parameter

Description

Range

Default

<A.B.C.D>

Configures the IP address of the mobility manager server for the managed device to communicate with.

user <word> <string>

Configures the username and password to communicate with MMS.

Username: string of length 1–31

Password: string of length 1–31

auth-prot {md5 | sha} <string>

Configures authentication protocol of the user with password.

md5: HMAC-MD5Message Digest 5. The MD5 algorithm is a widely used hash function producing a 128-bit hash value from the data input. -96 Digest Authentication Protocol

sha: HMAC-SHASecure Hash Algorithm. SHA is a family of cryptographic hash functions. The SHA algorithm includes the SHA, SHA-1, SHA-2 and SHA-3 variants. -96 Digest Authentication Protocol

interval <secs>

Configures the time it takes for a UDPUser Datagram Protocol. UDP is a part of the TCP/IP family of protocols used for data transfer. UDP is typically used for streaming media. UDP is a stateless protocol, which means it does not acknowledge that the packets being sent have been received. packet to travel to and from the trap server (round-trip time). This value indicates the timeout.

0–65535

0

priv-prot

Configures the privacy protocol of the user.

AESAdvanced Encryption Standard. AES is an encryption standard used for encrypting and protecting electronic data. The AES encrypts and decrypts data in blocks of 128 bits (16 bytes), and can use keys of 128 bits, 192 bits, and 256 bits.: CFB128-AESAdvanced Encryption Standard. AES is an encryption standard used for encrypting and protecting electronic data. The AES encrypts and decrypts data in blocks of 128 bits (16 bytes), and can use keys of 128 bits, 192 bits, and 256 bits.-128 Symmetric Encryption Protocol

DESData Encryption Standard. DES is a common standard for data encryption and a form of secret key cryptography, which uses only one key for encryption and decryption.: CBC-DESData Encryption Standard. DES is a common standard for data encryption and a form of secret key cryptography, which uses only one key for encryption and decryption. Symmetric Encryption Protocol

retrycount <count>

Configures the maximum number of retries allowed to authenticate with MMS.

0–256

0

rtls <rtls-portnumber>

Configures the UDPUser Datagram Protocol. UDP is a part of the TCP/IP family of protocols used for data transfer. UDP is typically used for streaming media. UDP is a stateless protocol, which means it does not acknowledge that the packets being sent have been received. port number for RTLSReal-Time Location Systems. RTLS automatically identifies and tracks the location of objects or people in real time, usually within a building or other contained area. data collection.

string of length 1–256

8000

trap-version {1 | 2c | 3}

Configures trap server's SNMPSimple Network Management Protocol. SNMP is a TCP/IP standard protocol for managing devices on IP networks. Devices that typically support SNMP include routers, switches, servers, workstations, printers, modem racks, and more. It is used mostly in network management systems to monitor network-attached devices for conditions that warrant administrative attention.  version.

1, 2c, or 3

udp-port <portnumber>

Configures trap server's UDPUser Datagram Protocol. UDP is a part of the TCP/IP family of protocols used for data transfer. UDP is typically used for streaming media. UDP is a stateless protocol, which means it does not acknowledge that the packets being sent have been received. port number.

1–65535

162

Usage Guidelines

To configure a username and password for the managed device to communicate with MMS, execute the following command:

(host) [mm] (config) #mobility-manager 1.1.1.1 user testUN1 testUN1

The interval time, retry count, RTLSReal-Time Location Systems. RTLS automatically identifies and tracks the location of objects or people in real time, usually within a building or other contained area. port number, and UDPUser Datagram Protocol. UDP is a part of the TCP/IP family of protocols used for data transfer. UDP is typically used for streaming media. UDP is a stateless protocol, which means it does not acknowledge that the packets being sent have been received. port number are optional parameters that can be configured using the mobility-manager command.

If you try to configure a third mobility manager server, the following message is displayed:

Maximum number of 2 MMS servers already configured.

Example

The following command is an example to configure MMS and allow a managed device to communicate with it:

(host) [mm] (config) #mobility-manager 1.1.1.1 user testUN1 testUN1 auth-prot md5 authpswd interval 250

Related Commands

Command

Description

show mobility-managers

This command displays information of MMS.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/