You are here: Home > CLI Commands > Just_CLI_Topics > openflow-profile

openflow-profile

openflow-profile

auxiliary-channel-port <port>

bind-vlan [add|remove] <vlan>

controller-ip <ip-addr> <port>

mode passive

no

openflow-auxiliary-enable

openflow-enable

tls-ca-cert-file <tls-ca-cert-file>

tls-certificate-file <tls-certificate-file>

tls-enable

tls-key-file <tls-key-file>

version {v1.0|v1.3}

Description

This command configures OpenFlowOpenFlow is an open communications interface between control plane and the forwarding layers of a network. profile on the managed device.

Syntax

Parameter

Description

Range

Default

auxiliary-channel-port <port>

Configures a listening port for OpenFlowOpenFlow is an open communications interface between control plane and the forwarding layers of a network. Controller in the auxiliary channel (UDPUser Datagram Protocol. UDP is a part of the TCP/IP family of protocols used for data transfer. UDP is typically used for streaming media. UDP is a stateless protocol, which means it does not acknowledge that the packets being sent have been received.) to send and receive packets without consuming bandwidth on the main channel.

bind-vlan [add|remove] <vlan>

Configures a specified range of OpenFlowOpenFlow is an open communications interface between control plane and the forwarding layers of a network. VLANSVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN.. You can optionally add or remove the specified VLANsVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. or VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. range from the configured list of VLANsVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN..

controller-ip <port>

Configures the IP and listening port of the OpenFlowOpenFlow is an open communications interface between control plane and the forwarding layers of a network. Controller running on Mobility Master.

1-65535

6633

mode {passive}

Sets the OpenFlow agentOpenFlow agent. OpenFlow is a software module in Software-Defined Networking (SDN) that allows the abstraction of any legacy network element, so that it can be integrated and managed by the SDN controller. OpenFlow runs on network devices such as switches, routers, wireless controllers, and APs. mode.

This release of ArubaOS provides support only for passive mode.

passive

passive

no

Negates any configuration.

openflow-auxiliary-enable

Enables or disables OpenFlowOpenFlow is an open communications interface between control plane and the forwarding layers of a network. auxiliary channel.

disabled

openflow-enable

Enables or disables OpenFlow agentOpenFlow agent. OpenFlow is a software module in Software-Defined Networking (SDN) that allows the abstraction of any legacy network element, so that it can be integrated and managed by the SDN controller. OpenFlow runs on network devices such as switches, routers, wireless controllers, and APs. on the managed device.

disabled

tls-ca-cert-file <tls-ca-cert-file>

Configures the CACertificate Authority or Certification Authority. Entity in a public key infrastructure system that issues certificates to clients. A certificate signing request received by the CA is converted into a certificate when the CA adds a signature generated with a private key. See digital certificate. certificate file from the specified path.

tls-certificate-file <tls-certificate-file>

Configures the certificate file from the specified path.

tls-enable

Enables or disables TLSTransport Layer Security. TLS is a cryptographic protocol that provides communication security over the Internet. TLS encrypts the segments of network connections above the Transport Layer by using asymmetric cryptography for key exchange, symmetric encryption for privacy, and message authentication codes for message integrity. .

disabled

tls-key-file <tls-key-file>

Configures the key from the specified path

version {v1.0|v1.3}

Configures the OpenFlowOpenFlow is an open communications interface between control plane and the forwarding layers of a network. version.

v1.3

Usage Guidelines

The OpenFlowOpenFlow is an open communications interface between control plane and the forwarding layers of a network. profile must be configured from the /md node hierarchy of Mobility Master. OpenFlowOpenFlow is an open communications interface between control plane and the forwarding layers of a network. profile is disabled by default. For OpenFlowOpenFlow is an open communications interface between control plane and the forwarding layers of a network. to be functional in a network, you must enable OpenFlowOpenFlow is an open communications interface between control plane and the forwarding layers of a network. Controller on the Mobility Master and OpenFlow agentOpenFlow agent. OpenFlow is a software module in Software-Defined Networking (SDN) that allows the abstraction of any legacy network element, so that it can be integrated and managed by the SDN controller. OpenFlow runs on network devices such as switches, routers, wireless controllers, and APs. on the required Managed devices. By default, OpenFlowOpenFlow is an open communications interface between control plane and the forwarding layers of a network. is disabled on Mobility Master as well as the managed devices.

Examples

Execute the following commands to configure and enable the OpenFlowOpenFlow is an open communications interface between control plane and the forwarding layers of a network. profile:

(host) [md] (config) #openflow-profile

(host) [md] (Openflow-profile) #openflow-enable

(host) [md] (Openflow-profile) #controller-ip <master-ip> <port>

Related Commands

Command

Description

show openflow-profile

Displays the OpenFlowOpenFlow is an open communications interface between control plane and the forwarding layers of a network. profile configuration information on the managed device.

show openflow

Displays the OpenFlowOpenFlow is an open communications interface between control plane and the forwarding layers of a network. information on the managed device.

openflow-controller

Configures the OpenFlowOpenFlow is an open communications interface between control plane and the forwarding layers of a network. Controller on Mobility Master.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platform

License

Command Mode

All platforms

PEFNGPolicy Enforcement Firewall. PEF also known as PEFNG provides context-based controls to enforce application-layer security and prioritization. The customers using Aruba mobility controllers can avail PEF features and services by obtaining a PEF license. PEF for VPN users—Customers with PEF for VPN license can apply firewall policies to the user traffic routed to a controller through a VPN tunnel. license.

Config mode on Mobility Master.

/*]]>*/