You are here: Home > CLI Commands > Just_CLI_Topics > papi-security

papi-security

papi-security {enhanced-security|key <key>}

no

Description

The papi-security command enforces advanced security options and provides an enhanced level of security. It allows to enable or disable the PAPIProcess Application Programming Interface. PAPI controls channels for ARM and Wireless Intrusion Detection System (WIDS) communication to the master controller. A separate PAPI control channel connects to the local controller where the SSID tunnels terminate. Enhanced Security configuration and to configure a new security key if required.

Syntax

Parameter

Description

Range

Default

Enhanced-security

Enables PAPIProcess Application Programming Interface. PAPI controls channels for ARM and Wireless Intrusion Detection System (WIDS) communication to the master controller. A separate PAPI control channel connects to the local controller where the SSID tunnels terminate. Enhanced Security

Disable

Key <key>

Secret key that is used to authenticate messages between systems

10–64 characters

no

Disables the earlier configuration

Usage Guidelines

This command allows you to use advanced options that regulate PAPIProcess Application Programming Interface. PAPI controls channels for ARM and Wireless Intrusion Detection System (WIDS) communication to the master controller. A separate PAPI control channel connects to the local controller where the SSID tunnels terminate. communication between Mobility Master and managed devices. When enhanced security is enabled, PAPIProcess Application Programming Interface. PAPI controls channels for ARM and Wireless Intrusion Detection System (WIDS) communication to the master controller. A separate PAPI control channel connects to the local controller where the SSID tunnels terminate. messages are authenticated at the receiving device and are denied if validation failed.

 

Mismatch in secret key will affect centralized licensing and AirWave.

One of the ways PAPIProcess Application Programming Interface. PAPI controls channels for ARM and Wireless Intrusion Detection System (WIDS) communication to the master controller. A separate PAPI control channel connects to the local controller where the SSID tunnels terminate. messages are authenticated is through a shared secret key. The papi-security command lets you configure a key on the Mobility Master and the managed devices. If no key is configured, then the controller uses the default key.

 

The Mobility Master and the managed device must be configured with the same PAPIProcess Application Programming Interface. PAPI controls channels for ARM and Wireless Intrusion Detection System (WIDS) communication to the master controller. A separate PAPI control channel connects to the local controller where the SSID tunnels terminate.  key.

Examples

To enable the PAPIProcess Application Programming Interface. PAPI controls channels for ARM and Wireless Intrusion Detection System (WIDS) communication to the master controller. A separate PAPI control channel connects to the local controller where the SSID tunnels terminate. Enhanced Security mode, execute the following command:

(host)[mynode] (config) #papi-security

(host)[mynode] (PAPI Security Profile) #enhanced-security

To configure a new PAPIProcess Application Programming Interface. PAPI controls channels for ARM and Wireless Intrusion Detection System (WIDS) communication to the master controller. A separate PAPI control channel connects to the local controller where the SSID tunnels terminate. Enhanced Security key for controllers and AirWave, execute the following command:

(host)[mynode] (PAPI Security Profile) #key 1234567890

Related Commands

Command

Description

show papi-security

Shows the status of the PAPIProcess Application Programming Interface. PAPI controls channels for ARM and Wireless Intrusion Detection System (WIDS) communication to the master controller. A separate PAPI control channel connects to the local controller where the SSID tunnels terminate. Enhanced Security configuration of thecontroller.

show ipc statistics app-id

show ipc statistics app-name

Show the PAPIProcess Application Programming Interface. PAPI controls channels for ARM and Wireless Intrusion Detection System (WIDS) communication to the master controller. A separate PAPI control channel connects to the local controller where the SSID tunnels terminate. statistics for messages transmitted, received, signed, validated, denied, and more based on application ID or the application name.

Command History

Release

Modification

ArubaOS 8.0.1.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master and managed devices.

/*]]>*/