You are here: Home > CLI Commands > Just_CLI_Topics > password_recovery_disable

password-recovery-disable

password-recovery-disable

no ...

Description

This command disables the default password recovery feature in the controller.

Syntax

Parameter

Description

password-recovery-disable

Disables the default password recovery feature.

no

Enables the default password recovery feature.

Usage Guidelines

These commands can be executed in SSHSecure Shell. SSH is a network protocol that provides secure access to a remote device.  sessions and serial console sessions with the controller.

Example

The following example shows how to disable the default password recovery user:

(host) configure terminal

Enter Configuration commands, one per line. End with CNTL/Z

(host) (config) #password-recovery-disable

 

The following example shows how to enable the default password recovery user:

(host) configure terminal

Enter Configuration commands, one per line. End with CNTL/Z

(host) (config) #no password-recovery-disable

Related Commands

Command

Description

show mgmt-users

This command lists the management users configured on the controller and also shows the status of the default password recovery user.

password-recovery-user

This command creates an alternate password recovery user to recover the lost password.

Command History

Release

Modification

ArubaOS 8.4.0.0

The command is introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Configuration mode on controller.

/*]]>*/