You are here: Home > CLI Commands > Just_CLI_Topics > password-recovery-user

password-recovery-user

password-recovery-user <username>

no ...

Description

This command creates an alternate password recovery user and disables the default password recovery feature.

Syntax

Parameter

Description

<username>

User name for the password recovery user.

no

Deletes the configured password recovery user and enables the default password recovery feature.

Usage Guidelines

These commands can be executed in SSHSecure Shell. SSH is a network protocol that provides secure access to a remote device. sessions and serial console sessions with the controller.

Example

The following example shows how to configure the alternate password recovery user:

(host) #configure terminal

Enter Configuration commands, one per line. End with CNTL/Z

(host) (config) #password-recovery-user recadmin

Password:******

Re-Type password:******

(host) (config) #exit

The following example shows how to delete the alternate password recovery user:

(host) configure terminal

Enter Configuration commands, one per line. End with CNTL/Z

(host) (config) #no password-recovery-user

Related Commands

Command

Description

show mgmt-users

This command lists the management users configured on the controller and also shows the status of the default password recovery user.

password-recovery-disable

This command disables the default password recovery feature.

Command History

Release

Modification

ArubaOS 8.4.0.0

The command is introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Configuration mode on controller.

/*]]>*/