You are here: Home > CLI Commands > Just_CLI_Topics > rf dot11ad-radio-profile

rf dot11-60GHz-radio-profile

rf dot11-60GHz-radio-profile <profile>

channel

clone

no

Description

This command configures AP radio settings for the 60 GHzGigahertz. frequency bandBand refers to a specified range of frequencies of electromagnetic radiation. on a 802.11802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing. 60 GHzGigahertz. radio profile.

Syntax

Parameter

Description

Range

Default

channel

Indicates the radio channel.

0-3

NOTE: Channel 1 is not recommended due to EIRPEffective Isotropic Radiated Power or Equivalent Isotropic Radiated Power. EIRP refers to the output power generated when a signal is concentrated into a smaller area by the Antenna. limitations.

2

clone

Copies data from a different 802.11802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing. 60 GHzGigahertz. radio profile.

no

Disables the 802.11802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing. 60 GHzGigahertz. radio profile configuration.

Usage Guidelines

This command configures radios that operate in the 60 GHzGigahertz. frequency bandBand refers to a specified range of frequencies of electromagnetic radiation., which includes radios utilizing the IEEEInstitute of Electrical and Electronics Engineers. 802.11ac802.11ac is a wireless networking standard in the 802.11 family that provides high-throughput WLANs on the 5 GHz band. standard. Channels must be valid for the country configured in the AP regulatory domain profile (see ap regulatory-domain-profile). To view the supported channels, use the show ap allowed-channels command.

Examples

The following command configures APs for the selected 802.11802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing. 60 GHzGigahertz. radio profile named "default".

(host)[node](config) #rf dot11-60GHz-radio-profile default

 

Command History

Release

Modification

ArubaOS 8.4.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/