You are here: Home > CLI Commands > Just_CLI_Topics > rf am-scan-profile

rf am-scan-profile

<profile-name>

clone <profile>

dwell-time-active-channel

dwell-time-dos-channel

dwell-time-other-reg-domain-channel

dwell-time-rare-channel

dwell-time-reg-domain-channel

no

scan-mode

Description

Configure an Air Monitor (AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode.) scanning profile.

Syntax

Parameter

Description

Range

Default

<profile-name>

Name of this instance of the profile.

1-63 characters

clone <profile>

Copy data from another AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode. scanning profile

dwell-time-active-channel

Dwell time (in ms) for channels where there is wireless activity.

100-32768 ms

500 ms

dwell-time-dos-channel

Dwell time (in ms) to contain rogue devices.

100-32768 ms

500 ms

dwell-time-other-reg-domain-channel

Dwell time (in ms) for channels not in the APs regulatory domain.

100-32768 ms

250 ms

dwell-time-rare-channel

Dwell time (in ms) for rare channels.

100-32768 ms

100 ms

dwell-time-reg-domain-channel

Dwell time (in ms ) for AP's Regulatory domain channels

100-32768 ms

250 ms

no

Delete the command

scan-mode

Set the scanning mode for the radio.

all-reg-domain

Scan channels in all regulatory domain

rare

Scan all channels (all regulatory domains and rare channels)

reg-domain

Scan channels in the APs regulatory domain

Usage Guidelines

Channels are categorized into the following types:

Active Channel: This qualifier indicates that wireless activity (for example, a probe request) is detected on this channel by the presence of an AP or other 802.11802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing. activity.

All Regulatory Domain Channels: A valid non-overlapping channel that is in the regulatory domain of at least one country.

Rare Channels: Channels that fall into a frequency range outside of the regulatory domain; 2484 MHzMegahertz and 4900MHz-4995MHz (J-channels), and 5000-5100Mhz.

Regulatory Domain Channels: A channel that belongs to the regulatory domain of the country in which the AP is deployed. The set of channels that belong to this group is a subset of the channels in all-reg-domain channel group.

Command History

Release

Modification

ArubaOS 8.5.0.0

A new parameter dwell-time-dos-channel was added.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All Platforms

RFProtect.

Config mode on Mobility Master.

/*]]>*/