You are here: Home > CLI Commands > Just_CLI_Topics > rf optimization-profile

rf optimization-profile

rf optimization-profile <profile-name>

clone <profile>

handoff-assist

low-rssi-threshold <number>

no ...

rssi-check-frequency <number>

rssi-falloff-wait-time <number>

Description

This command configures the RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. optimization profile.

Syntax

Parameter

Description

Range

Default

<profile-name>

Name of this instance of the profile. The name must be 1-63 characters.

“default”

clone

Name of an existing optimization profile from which parameter values are copied.

handoff-assist

Allows the controller to force a client off an AP when the RSSIReceived Signal Strength Indicator. RSSI is a mechanism by which RF energy is measured by the circuitry on a wireless NIC (0-255). The RSSI is not standard across vendors. Each vendor determines its own RSSI scale/values. drops below a defined minimum threshold.

disabled

low-rssi-threshold

Minimum RSSIReceived Signal Strength Indicator. RSSI is a mechanism by which RF energy is measured by the circuitry on a wireless NIC (0-255). The RSSI is not standard across vendors. Each vendor determines its own RSSI scale/values., above which deauth should never be sent.

1-255

10

no

Negates any configured parameter.

rssi-check-frequency

Interval, in seconds, to sample RSSIReceived Signal Strength Indicator. RSSI is a mechanism by which RF energy is measured by the circuitry on a wireless NIC (0-255). The RSSI is not standard across vendors. Each vendor determines its own RSSI scale/values..

9-255

3 seconds

rssi-falloff-wait-time <number>

Number of times the detected client RSSIReceived Signal Strength Indicator. RSSI is a mechanism by which RF energy is measured by the circuitry on a wireless NIC (0-255). The RSSI is not standard across vendors. Each vendor determines its own RSSI scale/values. level must fall below the minimum RSSIReceived Signal Strength Indicator. RSSI is a mechanism by which RF energy is measured by the circuitry on a wireless NIC (0-255). The RSSI is not standard across vendors. Each vendor determines its own RSSI scale/values. threshold the before the AP sends a deauthorization message to the client. The maximum value is 8 times.

0-8

4

Example

The following command configures an RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. optimization profile:

(host)[node](config) #rf optimization-profile Angela1

(host)[node](RF Optimization Profile "Angela1") #rssi-falloff-wait-time 3

(host)[node](RF Optimization Profile "Angela1") #rssi-check-frequency 2

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/