You are here: Home > CLI Commands > Just_CLI_Topics > router mobile

router mobile

router mobile

Description

This command enables Layer-3 (IP) mobility.

Syntax

No parameters.

Usage Guidelines

Use this command to enable IP mobility on a controller. IP mobility is disabled by default on the controller. This command must be executed on all controllers(master and local) that need to provide support for layer-3 roaming in a mobility domain. You can enable or disable IP mobility on a virtual AP profile with the wlan virtual-ap command (IP mobility is enabled by default in a virtual AP profile).

 

It is recommended to reboot the controller every time you enable or disable IP mobility.

Example

This command enables IP mobility:

(host) [mynode] (config) #router mobile

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/