You are here: Home > CLI Commands > Just_CLI_Topics > service

service

service

dhcp

dhcpv6

network-storage

print-server

scp

no...

Description

This command enables the DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  server on the controller.

Syntax

Parameter

Description

Default

dhcp

Enables the DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  server

Disabled

dhcpv6

Enables the DHCPv6 server

Disabled

network-storage

Enables the NASNetwork Access Server. NAS provides network access to users, such as a wireless AP, network switch, or dial-in terminal server. service

Disabled

print-server

Enables the printer service

Disabled

scp

Enables the scp server functionality on the controller or managed device

Disabled

no...

Removes the specific configuration

Usage Guidelines

You can enable and configure DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network. , DHCPv6, network-storage, print server, or scp in the controller to provide the following to clients:

DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network. : IP addresses to wireless clients if an external DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  server is not available.

DHCPv6: IPv6 addresses to wireless clients if an external DHCPv6 server is not available.

Network-storage: To provide access to the storage devices attached to the controller or managed device.

Printer-server: To provide access to printers attached to the controller .

scp: To provide SCPSecure Copy Protocol. SCP is a network protocol that supports file transfers between hosts on a network. functionality on the controller itself rather than on an external server.

Example

The following command enables the DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  server in the controller or managed device:

(host) [mynode] (config) #service dhcp

The following command enables the DHCPv6 server in the controller or managed device:

(host) [mynode] (config) #service dhcpv6

The following command enables the NASNetwork Access Server. NAS provides network access to users, such as a wireless AP, network switch, or dial-in terminal server. services in the controller or managed device:

(host) [mynode] (config) #service network-storage

The following command enables the printer services in the controller or managed device:

(host) [mynode] (config) #service print-server

The following command enables the scp server functionality in the controller or managed device::

(host) [mynode] (config) #service scp

To disable the SCPSecure Copy Protocol. SCP is a network protocol that supports file transfers between hosts on a network. server functionality on the controller, execute the following command:

(host) [mynode] (config) #no service scp

Related Commands

Command

Description

show scp

Shows if the SCPSecure Copy Protocol. SCP is a network protocol that supports file transfers between hosts on a network. server functionality is enabled or not.

Command History

Release

Modification

ArubaOS 8.2.0.0

The scp parameter was introduced.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Configuration mode on the controller or managed device.

/*]]>*/