You are here: Home > CLI Commands > Just_CLI_Topics > show dot1x ap-table static-wep

show dot1x ap-table static-wep

show dot1x ap-table static-wep

Description

Shows the static WEPWired Equivalent Privacy. WEP is a security protocol that is specified in 802.11b and is designed to provide a WLAN with a level of security and privacy comparable to what is usually expected of a wired LAN. keys of all APs.

Syntax

No parameters.

Example

Issue this command to display the static WEPWired Equivalent Privacy. WEP is a security protocol that is specified in 802.11b and is designed to provide a WLAN with a level of security and privacy comparable to what is usually expected of a wired LAN. keys of all APs.

Static-WEP Key Information

--------------------------

AP-MAC Key1/Size Key2/Size Key3/Size Key3/Size

------ --------- --------- --------- ---------

Num APs: 0

 

The output of this command includes the following parameters:

Parameter

Description

AP-MAC

AP’s MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address

Key1/Size

WEPWired Equivalent Privacy. WEP is a security protocol that is specified in 802.11b and is designed to provide a WLAN with a level of security and privacy comparable to what is usually expected of a wired LAN. key 1 and its size

Key2/Size

WEPWired Equivalent Privacy. WEP is a security protocol that is specified in 802.11b and is designed to provide a WLAN with a level of security and privacy comparable to what is usually expected of a wired LAN. key 2 and its size

Key3/Size

WEPWired Equivalent Privacy. WEP is a security protocol that is specified in 802.11b and is designed to provide a WLAN with a level of security and privacy comparable to what is usually expected of a wired LAN. key 3 and its size

Key3/Size

WEPWired Equivalent Privacy. WEP is a security protocol that is specified in 802.11b and is designed to provide a WLAN with a level of security and privacy comparable to what is usually expected of a wired LAN. key 3 and its size

Related Commands

Command

Description

ap wifi-uplink-profile

This command configures a Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. uplink profile.

show ap config

Shows a large list of configuration settings for an ap-group or an individual AP.

Command History

Version

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or config mode on Mobility Master.

/*]]>*/