You are here: Home > CLI Commands > Just_CLI_Topics > show aaa alias-group

show aaa alias-group

show aaa alias-group [<ag_name>]

Description

This command shows an alias-group settings.

Syntax

Parameter

Description

Range

Default

<ag_name>

Shows settings of specified alias-group.

Usage Guidelines

This command shows an alias-group settings. For the remaining parameters, see the command syntax.

Example

The following example shows the list of alias-groups:

(host) [mynode] #show aaa alias-group

 

Alias Group List

----------------

Name References Profile Status

---- ---------- --------------

default 2

 

Total:1

Related Commands

Command

Description

aaa alias-group

This command configures a AAAAuthentication, Authorization, and Accounting. AAA is a security framework to authenticate users, authorize the type of access based on user credentials, and record authentication events and information about the network access and network resource consumption. alias with set of VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. derivation rules that could speed up user rule derivation processing for deployments with a very large number of UDRsUser Derivation Rule. UDR is a role assignment model used by the controllers running ArubaOS to assign roles and VLANs to the WLAN users based on MAC address, BSSID, DHCP-Option, encryption type, SSID, and the location of a user. For example, for an SSID with captive portal in the initial role, a UDR can be configured for scanners to provide a role based on their MAC OUI..

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/