You are here: Home > CLI Commands > Just_CLI_Topics > show aaa authentication stateful-ntlm

show aaa authentication stateful-ntlm

show aaa authentication stateful-ntlm [default|<profile-name>]

Description

This command shows the configuration settings of the stateful NT LANLocal Area Network. A LAN is a network of connected devices within a distinct geographic area such as an office or a commercial establishment and share a common communications line or wireless link to a server. Manager (NTLM) authentication profile.

Syntax

Parameter

Description

default

Shows the configuration settings of the default NTLM authentication profile.

<profile-name>

Shows the configuration settings of the specified NTLM authentication profile.

Usage Guidelines

This command shows the configuration settings of the stateful NTLM authentication profile. Issue this command without the <profile-name> parameter to display the entire stateful NTLM Authentication profile list, including profile status and the number of references to each profile. Include a profile name to display detailed Stateful NTLM authentication configuration information for that profile. Use this command to identify the default role assigned to users who have successfully authenticated using the NTLM authentication protocol, the name of the group of windows servers used to authenticate these users, and the NTLM authentication timeout period, in seconds.

Examples

The following example shows the configuration settings of the stateful NTLM authentication profile:

(host) [mynode] #show aaa authentication stateful-ntlm

 

Stateful NTLM Authentication Profile List

-----------------------------------------

Name References Profile Status

---- ---------- --------------

default 1

NTLMprofile1 1

 

Total:2

Two stateful NTLM authentication profiles, default and NTLMprofile1 are each referenced once by other profiles. The blank Profile Status column indicates that these profiles are both user-defined. If a profile is predefined, the value Predefined appears in the Profile Status column.

The following example displays configuration details for the stateful NTLM authentication profile “default”.

(host)[node] #show aaa authentication stateful-ntlm default

 

Stateful NTLM Authentication Profile "default"

----------------------------------------------

Parameter Value

--------- -----

Default Role guest

Server Group default

Mode Disabled

Timeout 10 sec

The output of this command includes the following parameters:

Parameter

Description

Default Role

This parameter shows the role assigned to NTLM authenticated users.

Server Group

The name of a windows server group.

Mode

The Mode parameter indicates whether or not this authentication profile is enabled or disabled.

Timeout

Timeout period for an authentication request, in seconds.

Related Commands

Command

Description

aaa authentication stateful-ntlm

This configures the settings displayed in the output of this show command.

Command History

Version

Modification

ArubaOS 8.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable and Config mode on Mobility Master.

/*]]>*/