You are here: Home > CLI Commands > Just_CLI_Topics > show aaa state log

show aaa state log

show aaa state log [info]

Description

Display global log files for AAAAuthentication, Authorization, and Accounting. AAA is a security framework to authenticate users, authorize the type of access based on user credentials, and record authentication events and information about the network access and network resource consumption. events.

Syntax

Parameter

Description

info

This parameter displays debugging information for internal use only.

Usage Guidelines

If you have enabled per-user logging using the aaa log command, the output of this command displays global AAAAuthentication, Authorization, and Accounting. AAA is a security framework to authenticate users, authorize the type of access based on user credentials, and record authentication events and information about the network access and network resource consumption. log files for events that are not triggered by individual user authentication, such as AP authentication and the initial pre-authentication processes that occur before a client authenticates to the controller.

To display log files for events triggered by a specific user, use the command show user or show ipv6 user-table ip <ipv6-addr> log.

Example

The example below shows a partial list of the global log files displayed by the show aaa state log command..

(host) #show aaa state log

1: At Thu Apr 11 10:41:27: [L] Type cert-downloaded * id 0 len 0, bssid 00:00:00:00:00:00 | mac: 00:00:00:00:00:00

2: At Thu Apr 11 10:43:17: [L] Type ap-up * id 0 len 0, bssid 6c:f3:7f:5f:2c:b0 | mac: 00:00:00:00:00:00

3: At Thu Apr 11 10:43:17: [L] Type ap-up * id 0 len 0, bssid 6c:f3:7f:5f:2c:a0 | mac: 00:00:00:00:00:00

4: At Thu Apr 11 10:43:50: [L] Type station-term-start * id 10 len 0, bssid 6c:f3:7f:5f:2c:a0 | mac: 50:a4:c8:bd:be:41

5: At Thu Apr 11 10:43:50: [L] Type station-data-ready_ack * id 10 len 0, bssid 00:00:00:00:00:00 | mac: 50:a4:c8:bd:be:41

 

Related Commands

Parameter

Description

aaa log

Issue this command to enable per-user logging.

show user

show ipv6 user-table

Display log files for authentication events triggered by a specific IPv4 or IPV6 user.

 

Command History

Command

Description

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/