You are here: Home > CLI Commands > Just_CLI_Topics > show aaa state messages

show aaa state messages

Description

Display numbers of authentication messages sent and received.

Syntax

No parameters.

Usage Guidelines

This command displays a general overview of authentication statistics. To view authentication information for specific profiles such as a captive portalA captive portal is a web page that allows the users to authenticate and sign in before connecting to a public-access network. Captive portals are typically used by business centers, airports, hotel lobbies, coffee shops, and other venues that offer free Wi-Fi hotspots for the guest users., MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. or 801.x authentication profile, issue the commands specific to those features.

Example

The output of this command displays tables of statistics for PAPIProcess Application Programming Interface. PAPI controls channels for ARM and Wireless Intrusion Detection System (WIDS) communication to the master controller. A separate PAPI control channel connects to the local controller where the SSID tunnels terminate. , RAW socket and Sibyte messages.

 

(host) #show aaa state messages

PAPI Messages

-------------

Msg ID Name Since last Read Total

------ ---- --------------- -----

5004 set master ip 2 2

7005 Set switch ip 1 1

7007 Set VLAN ip 5 5

66 delete xauth vpn users 1 1

 

RAW socket Messages

-------------------

Msg ID Name Since last Read Total

------ ---- --------------- -----

1 raw PAP req 188 188

33 captive portal config 11113 11113

59 TACACS ACCT config for cli 1 1

60 TACACS ACCT config for web 1 1

 

Sibyte Messages

---------------

Opcode Name Sent Since Last Read Sent Total Recv Since Last Read Recv Total

------ ---- -------------------- ---------- -------------------- ----------

2 bridge 21 21 0 0

4 session 4877 4877 0 0

11 ping 768 768 768 768

13 8021x 114563 114563 229126 229126

15 acl 803 803 0 0

16 ace 5519 5519 0 0

17 user 781821 781821 0 0

27 bwm 3 3 0 0

29 wkey 27109 27109 4 4

42 nat 1 1 0 0

43 user tmout 4164 4164 4160 4160

56 forw unenc 1787103 1787103 0 0

64 auth 5268 5268 5267 5267

94 aesccm key 17885 17885 0 0

111 dot1x term 196813 196813 151161 151161

114 rand 1614 1614 1612 1612

126 eapkey 1316231 1316231 2632462 2632462

 

114 rand 2 2 0 0

 

The output of this command contains the following parameters:

Parameter

Description

Msg ID

ID number for the message type.

Name

Message name.

Since last Read

Number of messages received since the buffer was last read.

Total

Total number of message received since the controller was last reset.

opcode

Code number of the message type.

Sent Since last Read

Number of messages sent since the buffer was last read.

Sent Total

Total number of message sent since the controller was last reset.

Recv Since last Read

Number of messages received since the buffer was last read.

Recv Total

Total number of message received since the controller was last reset.

Command History

Command

Description

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/