You are here: Home > CLI Commands > Just_CLI_Topics > show airmatch debug feasibility

show airmatch debug feasibility

show airmatch debug feasibility

ap-name <name>

mac <mac>

Description

Display information about an AP's feasibility based on that AP's hardware capability, radio and regulatory domain, and radio events such as radar detection and high noise detection.

Syntax

Parameter

Description

ap-name <name>

Name of an AP for which you want to view AirMatch feasibility data

mac <mac>

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address an AP for which you want to view AirMatch feasibility data

Example

The following example displays feasibility information for an AP-345 access point.

(host) [mynode] (802.11g radio profile "default") #show airmatch debug feasibility ap-name ard4

Field Value

----- -----

Mac c8:b5:ad:ba:eb:c0

Updated On 2017-10-19 18:24:48

Current Opmode DUAL_BAND

HW Supported Opmodes DUAL_BAND,DUAL_5G

Configured Opmodes DUAL_BAND

Feasible Opmodes DUAL_BAND

Chan 20MHz 36,44,48,52

Chan 40MHz

Chan 80MHz

Chan 160MHz

Bandwidth 20MHz

Config BW range(MHz) 20 - 160

Hardware BW range(MHz) 20 - 40

Eirp Range Chan 20MHz 52:[12,16] 36:[12,16] 44:[12,16] 48:[12,16]

Eirp Range Chan 40MHz

Eirp Range Chan 80MHz

Eirp Range Chan 160MHz

EIRP(dBm) 0 - 0

Config EIRP range(dBm) 12 - 16

Hardware EIRP range(dBm) 0 - 0

EIRP Offset(dB) 0

Band 5GHz

Band Range BAND_LOWER

Update Reason Flex Radio Update

Last Update 2017-10-19 18:24:48

AirMatch Radio Feasibility Band 2GHz for current opmode DUAL_BAND

-------------------------------------------------------------------

Field Value

----- -----

Mac c8:b5:ad:ba:eb:c0

Updated On 2017-10-19 18:24:48

Current Opmode DUAL_BAND

HW Supported Opmodes DUAL_BAND,DUAL_5G

Configured Opmodes DUAL_BAND

Feasible Opmodes DUAL_BAND

Chan 20MHz 1,6,11

Chan 40MHz 1,7

Chan 80MHz

Chan 160MHz

Bandwidth 20MHz,40MHz

Config BW range(MHz) 20 - 40

Hardware BW range(MHz) 20 - 40

Eirp Range Chan 20MHz 6:[11,12] 11:[11,12] 1:[11,12]

Eirp Range Chan 40MHz 1:[11,12] 7:[11,12]

Eirp Range Chan 80MHz

Eirp Range Chan 160MHz

EIRP(dBm) 11 - 12

Config EIRP range(dBm) 11 - 12

Hardware EIRP range(dBm) 10 - 25

EIRP Offset(dB) 0

Band 2GHz

Band Range BAND_FULL

Update Reason Flex Radio Update

Last Update 2017-10-19 18:24:48

AirMatch Radio Feasibility Band 5GHz for current opmode DUAL_BAND

-------------------------------------------------------------------

Field Value

----- -----

Mac c8:b5:ad:ba:eb:d0

Updated On 2017-10-19 18:24:45

Current Opmode DUAL_BAND

HW Supported Opmodes DUAL_BAND,DUAL_5G

Configured Opmodes DUAL_BAND

Feasible Opmodes DUAL_BAND

Chan 20MHz 44,48

Chan 40MHz 36,44,149,157

Chan 80MHz 52,100,116,132

Chan 160MHz 36

Bandwidth 20MHz,40MHz,80MHz,160MHz,80+80MHz

Config BW range(MHz) 20 - 160

Hardware BW range(MHz) 20 - 160

Eirp Range Chan 20MHz 44:[12,16] 48:[12,16]

Eirp Range Chan 40MHz 36:[12,16] 44:[12,16] 149:[12,16] 157:[12,16]

Eirp Range Chan 80MHz 52:[12,16] 100:[12,16] 116:[12,16] 132:[12,16]

Eirp Range Chan 160MHz 36:[12,16]

EIRP(dBm) 12 - 16

Config EIRP range(dBm) 12 - 16

Hardware EIRP range(dBm) 0 - 31

EIRP Offset(dB) 0

Band 5GHz

Band Range BAND_FULL

Update Reason Flex Radio Update

Last Update 2017-10-19 18:24:45

 

AirMatch Radio Feasibility Band 5GHz for alternate opmode DUAL_5G

-------------------------------------------------------------------

Field Value

----- -----

Mac c8:b5:ad:ba:eb:d0

Updated On 2017-10-19 18:24:45

Current Opmode DUAL_BAND

HW Supported Opmodes DUAL_BAND,DUAL_5G

Configured Opmodes DUAL_BAND

Feasible Opmodes DUAL_BAND

Chan 20MHz 100,104,108,112,116,120,124,128,132,136,140,144,149,153,157,161

Chan 40MHz 149,157

Chan 80MHz 100,116,132

Chan 160MHz

Bandwidth 20MHz,40MHz,80MHz,80+80MHz

Config BW range(MHz) 20 - 160

Hardware BW range(MHz) 20 - 160

Eirp Range Chan 20MHz 112:[12,16] 140:[12,16] 149:[12,16] 161:[12,16] 116:[12,16] 136:[12,16] 144:[12,16] 100:[12,16] 153:[12,16] 157:[12,16] 124:[12,16] 128:[12,16] 132:[12,16] 104:[12,16] 108:[12,16] 120:[12,16]

Eirp Range Chan 40MHz 149:[12,16] 157:[12,16]

Eirp Range Chan 80MHz 100:[12,16] 116:[12,16] 132:[12,16]

Eirp Range Chan 160MHz

EIRP(dBm) 0 - 0

Config EIRP range(dBm) 12 - 16

Hardware EIRP range(dBm) 0 - 0

EIRP Offset(dB) 0

Band 5GHz

Band Range BAND_UPPER

Update Reason Flex Radio Update

Last Update 2017-10-19 18:24:45

The output of this command includes the following parameters:

Parameter Description
Mac

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the AP radio

Updated On

The last time the AP radio's feasibility information was updated in the Mobility Master database

Current Opmode

Current operation mode

HW Supported Opmodes

Supported operation modes

Configured Opmodes

Configured operation modes

Feasible Opmodes

Feasible operation modes

Chan 20MHz

List of feasible channels in 20 MHzMegahertz bandwidth

Chan 40MHz

List of feasible channels in 40 MHzMegahertz bandwidth

Chan 80MHz

List of feasible channels in 80 MHzMegahertz bandwidth

Chan 160MHz

List of feasible channels in 160 MHzMegahertz bandwidth

Bandwidth

List of feasible channel bandwidths

Config BW range(MHz)

List of configured channel bandwidths

Hardware BW range(MHz)

List of channel bandwidths supported by the hardware

Eirp Range Chan 20MHz

Range of EIRPs supported for each channel in a 20 MHzMegahertz channel bandwidth

Eirp Range Chan 40MHz

Range of EIRPs supported for each channel in a 40 MHzMegahertz channel bandwidth

Eirp Range Chan 80MHz

Range of EIRPs supported for each channel in a 80 MHzMegahertz channel bandwidth

Eirp Range Chan 160MHz

Range of EIRPs supported for each channel in a 160 MHzMegahertz channel bandwidth

EIRP(dBm)

Current supported EIRPEffective Isotropic Radiated Power or Equivalent Isotropic Radiated Power. EIRP refers to the output power generated when a signal is concentrated into a smaller area by the Antenna. range, in dBmDecibel-Milliwatts. dBm is a logarithmic measurement (integer) that is typically used in place of mW to represent receive-power level. AMP normalizes all signals to dBm, so that it is easy to evaluate performance between various vendors..

Config EIRP range(dBm)

Configurable EIRPEffective Isotropic Radiated Power or Equivalent Isotropic Radiated Power. EIRP refers to the output power generated when a signal is concentrated into a smaller area by the Antenna. range, in dBmDecibel-Milliwatts. dBm is a logarithmic measurement (integer) that is typically used in place of mW to represent receive-power level. AMP normalizes all signals to dBm, so that it is easy to evaluate performance between various vendors.

Hardware EIRP range(dBm)

Hardware EIRPEffective Isotropic Radiated Power or Equivalent Isotropic Radiated Power. EIRP refers to the output power generated when a signal is concentrated into a smaller area by the Antenna. range, in dBmDecibel-Milliwatts. dBm is a logarithmic measurement (integer) that is typically used in place of mW to represent receive-power level. AMP normalizes all signals to dBm, so that it is easy to evaluate performance between various vendors.

EIRP Offset(dB)

Offset of the EIRPEffective Isotropic Radiated Power or Equivalent Isotropic Radiated Power. EIRP refers to the output power generated when a signal is concentrated into a smaller area by the Antenna. added to the computed EIRPEffective Isotropic Radiated Power or Equivalent Isotropic Radiated Power. EIRP refers to the output power generated when a signal is concentrated into a smaller area by the Antenna. (in dBDecibel. Unit of measure for sound or noise and is the difference or ratio between two signal levels.)

Band

Operational BandBand refers to a specified range of frequencies of electromagnetic radiation., in GHzGigahertz.

Band Range

Current bandBand refers to a specified range of frequencies of electromagnetic radiation. range

Update Reason

Reason for previous feasibility update, such as a periodic update, radar detection, changes to a regulatory domain profile, or a radio bandBand refers to a specified range of frequencies of electromagnetic radiation. change for an AP radio that can operate in flex-radio mode.

NOTE: An AP radio that supports flex mode can operate as a single radio in the 2.4 GHzGigahertz. bandBand refers to a specified range of frequencies of electromagnetic radiation., a single radio in the 5 GHzGigahertz. bandBand refers to a specified range of frequencies of electromagnetic radiation., or as two radios, operating separately in the 2.4 GHzGigahertz. and 5 GHzGigahertz. bandsBand refers to a specified range of frequencies of electromagnetic radiation..

Related Commands

Command

Description

airmatch profile

This command configures the AirMatch profile .

airmatch ap

A radio set with the airmatch ap freeze command uses a static radio configuration until those settings get explicitly canceled with the airmatch ap unfreeze command.

Command History

Release

Modification

ArubaOS 8.3.0.0

The following fields were introduced in the command output:

Current Opmode

HW Supported Opmodes

Configured Opmodes

Feasible Opmodes

Eirp Range Chan 20MHz

Eirp Range Chan 40MHz

Eirp Range Chan 80MHz

Eirp Range Chan 160MHz

ArubaOS 8.2.0.0

The output in the EIRP field can display EIRPEffective Isotropic Radiated Power or Equivalent Isotropic Radiated Power. EIRP refers to the output power generated when a signal is concentrated into a smaller area by the Antenna. values in .1 dBmDecibel-Milliwatts. dBm is a logarithmic measurement (integer) that is typically used in place of mW to represent receive-power level. AMP normalizes all signals to dBm, so that it is easy to evaluate performance between various vendors. increments, and the Update Reason field can show if an AirMatch update was made due to a radio bandBand refers to a specified range of frequencies of electromagnetic radiation. change by an AP radio that supports both 1x1 dual radio mode and 2x2 single radio mode.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/